LoadImage failed - Unsupported & No Installer in Open Core Picker

PizzaraGirl · 15. November 2021

So first time doing this, i am following this guide: OC Install Guide

and all i see when i boot into the OpenCore are:

Efi (external) dmg

Windows

OpenCore.efi

Reset NVRAM

when i boot into the "Efi (external) dmg" it just goes into verbose mode where nothing happens for about 20 seconds, then spits out "OCB: LoadImage failed - Unsupported"

i uploaded an attachment of the entire USB Dongle. opencore-2021-11-15-001340.zip Note: Removed folder "com.apple.recovery.boot" due to upload size constraints.

apfel-baum · 15. November 2021

hello PizzaraGirl , -

without knowing your hardware-softwarespecs, bootloaderversion, ~~even your efi itself,~~ its quite impossible to find a proper solution for your problem, the fishbulb of the fortunetelling lady is massive broken.

for example take pics or it doesn't happened

add the "-v" bootarg =verbose mode

help yourself- and us too,- for now and further and add your specs to your user-profile and- or your signature

i just take a close look in the fishbulb - and maybe the reason for none installer- is the min date min version failure - get a look at the opencore configuration-*.pdf

section 11.8 APFS Properties -page 81 - paragraph 5. 6. - this may help you - choose the "-1" option, for both

that's it maybe - a solution
may the schwarz be with you

edit- my fault i did not realize the the addon is your efi-folder

edit 2 - ocvalidate vs. config.plist -

current result

edit 3

is it a dell laptop ? - if not, disable the dell sensors.kext as written in the dortania-guide

- think about the kext order - compare it with for example dortania sample.plist

und btw. dein keyboardlayout sieht spaßig aus- hast du die efi von jemandem übernommen?

PizzaraGirl · 15. November 2021

apfel-baum, sorry for not posting my specs, i am on a dell latitude 5590.

note that i am installing mac os monterey.

the keyboard layout has been edited by me im in germany!

edit: my mindate and minversion have been -1 before and it didnt work /:

apfel-baum · 15. November 2021

your keyboardlayout seems to mismatch if it is en-de:3 , i think this layout does not exist..

did you follow the laptop-guide from dortania? - https://dortania.github.io/Ope…ptop.plist/kaby-lake.html

PizzaraGirl · 15. November 2021

yeah idk i just guessed what it could be, let me revert to what it says on the page, i'll update.

apfel-baum · 15. November 2021

use the guide, put the kext in the right order, step by step ,-try to boot

PizzaraGirl · 15. November 2021

Zitat von apfel-baum

put the kext in the right order, step by step

oh i just used ctrl + shift + r on ProperTree, as in you mean the kext > add > dictionary's orders?

Zitat von apfel-baum

OCS: Missing key UIScale, context <Output>! Serialisation returns 3 errors!

could you tell me what that means? its the default value, pretty sure the tutorial kept it default aswell.

Zitat von apfel-baum

Booter->Quirks->ProvideCustomSlide is enabled, but OpenRuntime.efi is not loaded

why didnt it load openruntime.efi?

apfel-baum · 15. November 2021

as alternative to propertree you can use https://github.com/ic005k/PlistEDPlus it is useable -free for the most os for varous platforms

use the l-v-w kext-order, 1. lilu, 2. virtualsmc,3. whatevergreen,....

edit-

try this one maybe it works already

PizzaraGirl · 15. November 2021

good news, the zip you sent me, actually worked, but it panicked after loading a kernel i couldnt take an image due to my phone having no battery but it said "lilu kext" and got stuck for about a minute until it said: "please report this kernel panic to apple" or whatever. i'll add a screenshot if this happens again.

apfel-baum · 15. November 2021

as a result- try the efi here

it should work actually better, the former one has a wrong platform-smbios

the origin is the efi by grt from the hardwarecenter

PizzaraGirl · 16. November 2021

thank you, i have monterey fully working now, only one more issue. My Wifi/BT and touchpad don't work. can i just drag the needed kexts in the kexts folder?

Hecatomb · 16. November 2021

change the activated voodoo input kext in the list up to the first place.

for wlan and bluetooth you need to change the kexts. delete the BrcmFirmwareData.kext BrcmPatchRAM3.kext BrcmBluetoothInjector.kext kexts and add the kexts that you need.

for intel cards you can use intelbluetoothinjector.kext , intelbluetoothfirmware.kext for the bluetooth, and Airportltlwm.kext. for the wlan

ps: you need to add the kexts into the oc config. without the kexts don't load

PizzaraGirl · 18. November 2021

ok so, when i installed intelbluetoothinjector and intelbluetoothfirmware it took like 3 minutes to boot because of something stalling "daemon" 3 times.

so when i remove these kexts it boots like it normally does. what did i do wrong?

5T33Z0 · 19. November 2021

PizzaraGirl Either you don't need these kexts (if the card is natively supported) or the kexts are in the wrong order. The correct order is shown below be. But as you may know Apple re-wrote the whole Bluetooth stack for macOS Monterey, so the issue might be related that. Please consulte the coreesponding Bluetooth under Monterey Thread to find out more:

Sammelthread für BT Probleme unter Monterey

PizzaraGirl · 19. November 2021

Hey Thank you for answering i will be trying these, but what about my touchpad tho? it doesn't work at all. Bluetooth might be an issue currently but i'd like to clear up my touchpad issue rn as i can't be asked to use an external mouse all the time.

5T33Z0 · 19. November 2021

For Trackpad fixes, read this: https://github.com/5T33Z0/OC-L…_Patches/Trackpad_Patches

Depending on the trackpad you are using certain combination of kexts may be required: https://github.com/5T33Z0/OC-L…Loading_Sequence_Examples

PizzaraGirl · 20. November 2021

ok, i guess i read enough to understand that i have most of this already in my config and kexts setup, i will send my current config because i don't get it, thanks.

5T33Z0 · 20. November 2021

Looks like an awful lot of voodoo kexts…

PizzaraGirl · 20. November 2021

yeah I know...

well I'm sure the issue isn't cuz of that right?

5T33Z0 · 20. November 2021

Pretty sure it is. You need to find out which ones you need.

Check this EFI for reference: https://github.com/nghiakhoi/O…terey-Dell-Latitude-E5590

Willkommen! Melde dich an oder registriere dich.

LoadImage failed - Unsupported & No Installer in Open Core Picker

Flipmao Vor 6 Minuten

CMMChris Vor einer Stunde

Bob-Schmu Vor 2 Stunden

Flipmao Vor 2 Stunden

Wolfe Vor 4 Stunden

Sonoma bootet nicht mehr nach OC Update

AMD Vega Frontier und Opencore, Bootscreen ja, dann nix mehr!

Der Mauszeiger (USB) bewegt sich ruckelnd

Gigabyte Z690 UD4 DDR4 Bios Update verursacht nun KP - RT.GV Wake Failure

Thunderbolt Card Titan Ridge wird angezeigt, funktioniert aber nicht.

Teilen

4 Benutzer haben hier geschrieben