Embedded Ryzen Board

  • Moin Moin in die Runde,


    es gibt mittlerweile ein relativ performantes 1,8" Ryzen Board:


    https://www.dfi.com/de/product/index/1455#overview


    • AMD Ryzen™ Embedded R1000 Series
    • Small form factor 1.8" SBC for space-limited applications
    • Single Channel DDR4 Memory Down up to 4GB/8GB
    • HDMI 1.4 resolution supports up to 4096x2160 @ 60Hz
    • Expansion and Storage: 1 Mini PCIe, 1 SMBus
    • Rich I/O: 1 Intel GbE, 1 USB 3.1 Gen 2, 2 Micro HDMI
    • 10 Jahre CPU-Lebensdauer bis Q2' 27 (Basierend auf AMD Roadmap)



    Liegt so bei 330€ etwa.


    GHF51GHF51


    ich überlege mir so ein Board anzuschaffen.


    Meinungen bezüglich Hackintosh/OpenCore Kompatibilität? Könnte ja klappen oder?


    Gruß Max

    Einmal editiert, zuletzt von maxman ()

  • Ich glaube, damit wird kein MacOS laufen. Die AMD iGPU wird nicht unterstützt.

  • Ach schade die kleineren Vegas sind wohl wirklich nicht zu empfehlen:

    "

    The integrated GPU found on lower end AMD CPUs have unfortunatly never had official support with community support quite lacking. While possible to get a display out with some work, graphics acceleration is basically imposiible making these APUs more of a hazard to macOS.

    Unsupported APUs:

    • Vega 11(Zen)
    • Vega 8(Zen)

    "

    https://dortania.github.io/GPU…/modern-gpus/amd-gpu.html

  • Kommt drauf an was man damit machen möchte. Als Headless Mini Home Server würde das wohl mit etwas Arbeit gehen.

    • Apple Mac Studio | M1 Ultra | 64GB RAM | 1TB
    • PowerMac G5 | Dual 2GHz | 8GB RAM | GeForce 6800 Ultra DDL
    • AMD Ryzen 9 3950X | ASUS Strix X570-I Gaming | 64GB DDR4-3600 CL16 RAM | Corsair MP600 M.2 NVMe | Radeon RX 6900 XT | Phanteks Enthoo Evolv Shift | Custom Loop | MacOS 12 | OpenCore
      Ryzen MacPro | EFI | RadeonSensor | Aureal
  • Kommt drauf an was man damit machen möchte. Als Headless Mini Home Server würde das wohl mit etwas Arbeit gehen.

    Genau das war die idee: ich brauche nur die reine CPU leistung headless... debugging technisch brauche ich natürlich irgendeine Displayausgabe.

  • Community Bot

    Hat das Label Erledigt hinzugefügt