Black screen with grey square when boot with installer. Asus Maximus VII Hero

  • Hello, first sorry for speaking English, I learn Deutsch in school but I can't it. I Have maid Ozmosis 1.03.167x-CPWN bios for my motherboard Asus Maximus VII Hero but when I try booting with macOS High Sierra installer plugged on USB, after POST I get black screen with grey square, I can't access to GUI or boot Windows. My Hardware is Asus Maximus VII Hero (Z97 Chipset), Xeon 1231v3, Sapphire RX 480 8GB. In bios I added EnhacedFAT, exFat, HFSPlus, ApfsDriverLoader, FakeSMC(modified) with sensors, USBInjectAll, OzmosisHFTTheme, OzmosisDefaults(modified), Ozmosis. Lilu, whatevergreen and intelmausiethernet is in appropriate OZ folder. I attach stock and my modified bios versions. If it's caused by wrong Ozmosis version please write me where I can find something like Ozmosis versions list.

    Dateien

    • stock.rom

      (8,39 MB, 108 Mal heruntergeladen, zuletzt: )
    • Finally.rom

      (8,39 MB, 99 Mal heruntergeladen, zuletzt: )

    iMac14,2 Asus Maximus VII Hero | Xeon 1231v3 @ 4GHz | 16GB DDR3 @ 2133MHz | GTX 1060 6GB | Intel I218V | SupremeFX(ALC1200) | Samsung SSD 950 PRO 256GB NVMe | High Sierra 10.13.6
    MacbookPro13,2 Acer Spin 5 | i5-6200u | HD620 | 8GB DDR4 2400MHz | BCM94352z | SSD 256GB | High Sierra 10.13.6

  • Couldn't take a look at you ROM yet but looks lile a GUI problem to me...


    Probably my OzmosisHFTheme has problems with your 21:9 monitor. Implement the OzmosisHorizontalTheme into your BIOS instead of the OzmosisHFTheme, then you shouldn't get that square.


    You can also press F12 during Boot to get to the bootmenu and then select your install thumb drive there, then you shouldn't have problems either.

    Du kommst bei deinem Problem nach dem unendlichsten Versuch nicht weiter? Dann schreib mir eine Nachricht für eine TeamViewer Sitzung. Nur wenn es gar nicht mehr weiter geht!
    Alle anderen Fragen und Anliegen gehören ins Forum.

  • @kuckkuck Like I say OzmosisHFTTheme is in bios modded file. I don't think problem is with it, when I turn on computer without USB GUI with bootmenu(only Windows Boot Manager showing) automatically opens. This GUI opens because I set this in OzmosisDefaults so F12 won't help. Or I'm mistaken and F12 is something else than this GUI which can be enabled in Defaults.plist if yes it won't show nothing other.

    iMac14,2 Asus Maximus VII Hero | Xeon 1231v3 @ 4GHz | 16GB DDR3 @ 2133MHz | GTX 1060 6GB | Intel I218V | SupremeFX(ALC1200) | Samsung SSD 950 PRO 256GB NVMe | High Sierra 10.13.6
    MacbookPro13,2 Acer Spin 5 | i5-6200u | HD620 | 8GB DDR4 2400MHz | BCM94352z | SSD 256GB | High Sierra 10.13.6

  • This GUI opens because I set this in OzmosisDefaults so F12 won't help. Or I'm mistaken and F12 is something else than this GUI which can be enabled in Defaults.plist


    F12 is supposed to open the boot selection of your BIOS, not the Ozm UserInterface. Sometimes it's not F12 but F8 or F11. Try that out or take a look at our manual.
    Also disable the bootentries filter in your defaults.
    If that doesn't help, place the Horizontal Theme.bin in EFI/Oz. You can find all themes here: Neue Themes / Ozmosis GUI / BootMenü / UserInterface

    Du kommst bei deinem Problem nach dem unendlichsten Versuch nicht weiter? Dann schreib mir eine Nachricht für eine TeamViewer Sitzung. Nur wenn es gar nicht mehr weiter geht!
    Alle anderen Fragen und Anliegen gehören ins Forum.

  • Ok, I will try to place Theme in Efi\Oz. Ok In my motherboard boot menu is F8, ye I've tried it but when i select install macos PC restarts :/

    iMac14,2 Asus Maximus VII Hero | Xeon 1231v3 @ 4GHz | 16GB DDR3 @ 2133MHz | GTX 1060 6GB | Intel I218V | SupremeFX(ALC1200) | Samsung SSD 950 PRO 256GB NVMe | High Sierra 10.13.6
    MacbookPro13,2 Acer Spin 5 | i5-6200u | HD620 | 8GB DDR4 2400MHz | BCM94352z | SSD 256GB | High Sierra 10.13.6

  • Your ROM has a locked MSR register. I did some changes to your ROM:

    • Unlocked the MSR register
    • Removed all Kexts but FakeSMC
    • Replaced the modules that had bad signatures (now you get 0 errors)
    • Added two more modules for better APFS support


    You can try this ROM:

    Dateien

    Du kommst bei deinem Problem nach dem unendlichsten Versuch nicht weiter? Dann schreib mir eine Nachricht für eine TeamViewer Sitzung. Nur wenn es gar nicht mehr weiter geht!
    Alle anderen Fragen und Anliegen gehören ins Forum.

  • Oh, very thanks :) Danke schön :D
    I fixed the issue by adding Theme.bin to EFI\Oz but additional fixes that make Hackintosh more pro makes me happy so again thanks for this patched BIOS :)

    iMac14,2 Asus Maximus VII Hero | Xeon 1231v3 @ 4GHz | 16GB DDR3 @ 2133MHz | GTX 1060 6GB | Intel I218V | SupremeFX(ALC1200) | Samsung SSD 950 PRO 256GB NVMe | High Sierra 10.13.6
    MacbookPro13,2 Acer Spin 5 | i5-6200u | HD620 | 8GB DDR4 2400MHz | BCM94352z | SSD 256GB | High Sierra 10.13.6

    Einmal editiert, zuletzt von MrVanosh ()

  • So everything works now? Then you can add the green tick to this thread ;)

    Du kommst bei deinem Problem nach dem unendlichsten Versuch nicht weiter? Dann schreib mir eine Nachricht für eine TeamViewer Sitzung. Nur wenn es gar nicht mehr weiter geht!
    Alle anderen Fragen und Anliegen gehören ins Forum.

  • Yes, everything works ok :)

    iMac14,2 Asus Maximus VII Hero | Xeon 1231v3 @ 4GHz | 16GB DDR3 @ 2133MHz | GTX 1060 6GB | Intel I218V | SupremeFX(ALC1200) | Samsung SSD 950 PRO 256GB NVMe | High Sierra 10.13.6
    MacbookPro13,2 Acer Spin 5 | i5-6200u | HD620 | 8GB DDR4 2400MHz | BCM94352z | SSD 256GB | High Sierra 10.13.6