Da mir die fehlerhafte USB-Konfiguration in macOS auf dem GA-Z170 mit Bios-Version F22f keine Ruhe gelassen hat, habe ich die Version F7 wieder draufgemacht. Mit Q-Flash geht das natürlich nicht, die Mobo-Hersteller erlauben kein Downgrade.
Mit dem FPT-Tool hat es aber funktioniert, nur das dabei die MAC-Adresse des Netzwerkadapters flöten geht. Ich hatte sie mir aber notiert.
Kennt jemand eine smarte Lösung, wie man die wieder ins Bios integrieren kann?
Ich habe da was gefunden und verstehe wegen mangelnder Englischkenntnisse nicht alles. Vielleicht kann mir bitte jemand helfen oder kennt noch einen anderen Weg.
https://forums.tweaktown.com/g…o-socket-1155-1150-a.html
So in etwa sollte das laufen:
1) Start HxD and load your BIOS into it, and then load the GBE15.bin from my GBE modpack into another tab.
2) The MAC adress of the onboard Intel LAN can be obtained by running ipconfig /all in a DOS prompt. Look for the 6 bytes MAC of the 82579V network connection, looking like 50-ab-13-44-ff-01. Also you might find it on a sticker on your mainboard if it has gotten lost somehow.
3) Find the location of the start offset of the GBe firmware within the original BIOS. Currently it is located at 1000h and the MAC adress is located at the very beginning of the GBe15.bin ROM, offset 0h-5h. You will find "88 88 88 88 87 88" there. This might be different in other BIOSses. To find the location you can always search for 888888888788 in your BIOS.
4) Copy the entire content of the second tab (GBE15.bin 0h-1fffh) over the GBe region in the first tab at offset 1000h-2fffh (Or the respective different offset for your BIOS) using paste-write (CTRL-B) in HxD.
5) Return to 1000h (Or your BIOS' GBe offset if different from that) and enter your MAC adress at 1000h-1005h.
6) Save the file to yourbios.bin and copy it into the FPT flasher directory.
ATTENTION: Only perform the following steps on the SECONDARY bios (BLUE on boards with a BIOS switch!) to reduce risk.
7) Backup your current BIOS by using backup.bat.
Flash your BIOS using 'fpt -bios -f yourbios.bin'
At this point, after flashing, the ME driver will stop working until after a reboot.