GA-Z97X-UD7 TH rev 1.0 - macOS 10.13 - ozmosis F6 - Schwarzen Bildschirm

  • Hallo, ich kann macOS 10.13 High Sierra nicht mit dem "ozmosis" Mod installieren, der auf der nächsten Seite zu finden ist:


    https://www.hackintosh-forum.d…?postID=138902#post138902


    Wenn ich von der Taste boote, komme ich auf einen schwarzen Bildschirm. Mein Motherboard sagt entweder "A0", wenn ich keine Festplatte und nur den USB-Stick habe, oder "A2" mit einer Festplatte zusätzlich zum USB-Stick.


    Gibt es spezielle Einstellungen im BIOS?


    Vielen Dank :)


    N.B.: Ich habe deepl.com benutzt, um meinen Text zu übersetzen, weil ich kein Deutsch spreche, aber ich kann auf Englisch schreiben ;)

  • Willkommen bei uns im Forum


    Was für hardware hast du in deinem Gehäuse verbaut?


    Mainboard, CPU, RAM, Prozessor? Grafikkarte?
    deepl scheint ja einen guten Job zu machen :D besser als google.

  • Hallo. Danke für die Antwort :)
    Gehäuse: Fractal 1 ca Hi-Def R4 Ti Design Define R4 Computer Case ATX/2x 5.25-Inch
    M.B.: GA-Z97X-UD7 TH rev 1.0
    CPU: Intel Core i7-4790K Processor (8M Cache, up to 4.40 GHz)
    RAM: Crucial Ballistix Tactical Tracer 16GB Kit (8GBx2) DDR3 1600 MT/s (PC3-12800) CL8 @1.5V UDIMM 240-Pin
    GPU: Intel Graphics Auf dem Motherboard (für den Moment) :
    Power Supply: Seasonic 520FL 520W Fanless 80+ Platinum Certified Full Modular Power Supply

  • Benutzt du für dein Ozmosis eine spezielle Defaults.plist unter /EFI/Oz auf der versteckten EFI-Partition?

    Gruß
    Al6042

    Keine Unterstützung per PN oder Pinnwand... Eure Anfragen gehören ins Forum, nicht in mein Postfach!

  • Benutzt du für dein Ozmosis eine spezielle Defaults.plist unter /EFI/Oz auf der versteckten EFI-Partition?


    Nein, ich habe den USB Stick mit dem macOS Installer nicht berührt. Vielleicht sollte ich das untersuchen.


    I only used Z97XU7TH_HighSierra.F6.zip and a USB Stick Installer :)

  • Please try this rom: Z97XU7TH_HighSierra.F6.zip I replaced CSMVideo with HermitCrabs patched one this should help to overcome the black screen Error.

  • Auf dem USB-Stick wirst du dass auch nicht finden, da die EFI-Partition deiner ersten Festplatte durch das Flashen mit Ozmosis den Ordner /EFI/Oz erhalten wird.
    Test bitte mal folgendes:
    - Mounte die versteckte EFI-Partition auf der ersten Festplatte und prüfe ob dort der Ordner /EFI/Oz vorhanden ist.
    - Wenn nicht, erstelle den Ordner und packe dort die beiliegende Defaults.plist hinein.
    - Wenn der Ordner bereits existiert, packe nur die Datei hinein.
    - Starte den Rechner neu und gehe ins BIOS
    - Führe im BIOS die folgende Tasten-Kombination aus: Alt+WinLogo+P+R... Damit wird Ozmosis zurückgesetzt und die veränderte Defaults.plist eingelesen und benutzt...


    Viel Erfolg...

    Dateien

    • Defaults.plist

      (2,3 kB, 110 Mal heruntergeladen, zuletzt: )

    Gruß
    Al6042

    Keine Unterstützung per PN oder Pinnwand... Eure Anfragen gehören ins Forum, nicht in mein Postfach!

  • Please try this rom: Z97XU7TH_HighSierra.F6.zip I replaced CSMVideo with HermitCrabs patched one this should help to overcome the black screen Error.


    Thanks for the help! However, that didn't help :( I still have the black screen identical with the previous patch.
    However today, while experimenting with the booting disc order in the BIOS, I could make the computer boots for a moment but the « no boot disc » icon appeared when the booting bar was half done. The Motherboard was indicating the error 51 (Memory initialization error occurs) during the boot, so maybe I have an issue with my RAM. I tried booting with one stick only then the other with no success : direct black screen. Also by default, my ram is at 1333 Mhz while it should be at 1600 Mhz. To get these 1600 Mhz I have to choose Profile1 in the BIOS. That doesn't affect my booting issue, unfortunately :)
    Also, I couldn't repeat the half boot.


    For the record, I tried with older BIOS patch that wasn't made for High Sierra, just to compare. I never have a black screen with but I only half boot. That wasn't a surprise, of course :)




    @al6042 :


    Danke für die Hilfe, aber ich versuche nur von dem USB Stick Installer zu booten, den ich aus dem macOS Installer gemacht habe. Ein Vanille-USB-Stick. Ich habe keine EFI-Partition darauf. Ich konnte macOS nicht auf einer Festplatte installieren.


    Code
    1. /dev/disk3 (external, physical):
    2. #: TYPE NAME SIZE IDENTIFIER
    3. 0: FDisk_partition_scheme *32.1 GB disk3
    4. 1: Apple_HFS Install macOS High S... 32.1 GB disk3s1

    Einmal editiert, zuletzt von Zaxonov ()

  • Das ist natürlich doof, da die Defaults.plist in dem ROM sehr wahrscheinlich nicht auf deine Bedürfnisse angepasst ist und somit auch zu Schwierigkeiten führen kann.
    Wie ist denn dein BIOS eingerichtet?


    An den wichtigsten Punkten sollte es so aussehen:

    • Extreme Memory Profile : Profile1
    • XHCI Mode : Auto
    • XHCI Hand-Off : Enabled
    • EHCI Hand-Off : Enabled
    • Secure Boot : Disable
    • Audio Controller : Enabled
    • Initial Display Output : IGFX
    • Intel Processor Graphics : Enabled
    • Intel Processor Graphics Memory: 32M
    • DVMT Total Memory Size : MAX

    Gruß
    Al6042

    Keine Unterstützung per PN oder Pinnwand... Eure Anfragen gehören ins Forum, nicht in mein Postfach!

  • @Zaxonov
    Du musst keine Beiträge zitieren, wenn deren Inhalt direkt über deiner Antwort stehen.

    Gruß
    Al6042

    Keine Unterstützung per PN oder Pinnwand... Eure Anfragen gehören ins Forum, nicht in mein Postfach!

  • A missing Theme may cause this kind of issues as well. Please test this one where I added the theme as well: Z97XU7TH_HighSierra.F6.zip

  • @griven :
    It works! I can boot until the Language choosing panel for the install! Thanks a lot! However the USB doesn't work. I can't use my mouse and keyboard but I think this is only a matter of trying the right USB port :)
    Thanks for the help!

  • That's nice to hear!


    Try it with an USB 2.0 Port.


    You will probably need USBInjectAll.kext after the install and then follow this guide or a similar one: Anleitung: USB 3.0 El Capitan / (High-) Sierra für jedermann (Zukunftssicher für Updates und komplett gepatcht)

    Du kommst bei deinem Problem nach dem unendlichsten Versuch nicht weiter? Dann schreib mir eine Nachricht für eine TeamViewer Sitzung. Nur wenn es gar nicht mehr weiter geht!
    Alle anderen Fragen und Anliegen gehören ins Forum.

  • @kuckkuck


    Yep I tried an USB 2.0, it's a common problem I had with the Hackintosh and it worked right away. Thanks for the kext! :)

  • Hello again, I have issue with my audio.
    Following griven advise from this thread:
    Cannot get ALC1150 audio with Ozmosis


    I have to patch my DSDT to inject AudioID1.
    However, I'm stuck at the extraction of the amiboardinfo. I have UEFITools but I have no clue what image to use to extract it.
    Also, Once i have my DSDT, If i manage to extract it, I have no clue on what to do patch it correctly...

  • Here's how to extract the DSDT Form AmiBoardInfo.bin: Original DSDT aus BIOS extrahieren


    You can just attach your DSDT and we'll patch it for you, or you can try to translate and follow this guide: https://www.hackintosh-forum.d…gepatchten-DSDT-Desktops/

    Du kommst bei deinem Problem nach dem unendlichsten Versuch nicht weiter? Dann schreib mir eine Nachricht für eine TeamViewer Sitzung. Nur wenn es gar nicht mehr weiter geht!
    Alle anderen Fragen und Anliegen gehören ins Forum.

  • Thanks a lot for your quick response!
    I understand how i was stuck at UEFITool. I tried to open the BIOS file but it was in grey in the opening panel (non selectable) so I thought that wasn't the right file...
    But now I see that we have to drag and drop the BIOS file on the UEFITool window :)


    However, I'm not sure if I stopped the selection at the right place in the hex editor... I attached a screenshot of the selection in Hex Fiend.


    Thanks again for your help!

  • Nope, that's unfortunately not right... Please attach your AmiBoardInfo.bin.

    Du kommst bei deinem Problem nach dem unendlichsten Versuch nicht weiter? Dann schreib mir eine Nachricht für eine TeamViewer Sitzung. Nur wenn es gar nicht mehr weiter geht!
    Alle anderen Fragen und Anliegen gehören ins Forum.