Skylake Sammelthread (Hilfe und Diskussionen)

  • Die KextsToPatch Einträge habe ich auch in der config.plist



    Dennoch schaltet sich der Monitor über DP beim booten dann ab. Kein Signal mehr ab halber Strecke.

    macOS Ventura | Motherboard: MSI MPG Z390I Gaming Edge AC | CPU: Intel® Core™ i5-9500 Processor 6 x 3.0 GHz | Arbeitsspeicher: 32 GB (DDR4-3200) | Sound: Realtek® ALC892

    Grafik: Readon RX 560 | Netzwerkkarte: BCM943602CS | Case: Streacom DB4 Fanless Cube Black


    ___________________


    macOS Ventura | Motherboard: MSI Z170I Pro Gaming AC | CPU: Intel® Core™ i5-6500 Processor 4 x 3.2 GHz | Arbeitsspeicher: 16 GB (DDR4-2133) | Sound: Realtek® ALC1150
    Grafik: Readon RX 560
    | Netzwerkkarte: BCM943602CS | Case: Streacom DB4 Fanless Cube Silver


    ___________________


    macOS Ventura | Motherboard: Asus P8H61-M LE | CPU: Intel® Core™ i5-2500 Processor 4 x 3.3 GHz | Arbeitsspeicher: 16 GB (DDR3-1333) | Sound: Realtek® ALC887
    Grafikkarte: NVIDIA GeForce GTX 650Ti | Netzwerkkarte: Realtek® RTL8111F | Case: XFX Mid Tower Type-01

  • Nettes Spielzeug :thumbsup:


    Was liegt da noch so im Spielzimmer rum? hehe


    Interne Graka deaktiviert? Sieht im BIOS Screenshot anders aus¿


    Wake on LAN funzt? Warum deaktiviert?

    Neues Projekt, in Arbeit:

    MSI B250M PRO-VD (MS-7A74) HackMac

    Pentium G4620 @3,70GHz

    16 Gb Ram G.Skill DDR4-2132

    Intel HD Graphics 630

    Bios 1.C0 vom 28.06.2018


  • Meinst du mich? Ich hab ja gar kein BIOS-Screenshot ;-). Und ob Wake on LAN geht weiß ich auch nicht, LAN nutze ich nicht.

    Mainboard: ASUS PRIME Z270-A • CPU: Intel Core i7-6700K • Grafikkarte: Saphirre HD 7870 GHz Edition 2GBOpenCore

  • Ansich ist es nicht schwer, ich verlinke mich aber nochmal selber ;)


    Bitte wegen der Übersicht NUR Konfigurationen posten, falls Diskussionsbedarf oder Fragen bestehen, stellt diese bitte im dafür Bereitgestellten Thread: Hilfe und Diskussionen

    iPhone 15 Pro Max - 256GB
    iPad Pro 12,9“ - 128GB inkl. Pencil

    Mac Mini M1 - 2020, 16GB RAM, 1TB SSD

    Windows Tower - 16GB RAM, Ryzen5 5600X, RTX2070, WaKü

    PS5 Digital / Xbox Series X

  • Hallo,


    hat jemand eine funktionierende EFI für mich? 10.12.3


    GA-Z170x-UD3 TH mit i6600k und 16GB Ram


    damit ich endlichh eine Installation auf diemem Rechner hin bekomme



    sorry bin mit mienen Know-How am Ende und brauche eine Neu-Start_Hilfe


    Vielen Dank
    Georg

  • Hallo @georgz und herzlich WIllkommen im Forum... :)


    Ich habe deine Frage mal in den passenden Thread verschoben, da in dem anderen eigentlich nur bereits lauffähige Skylake-Systeme vorgestellt werden, wie es der Titel Skylake Sammelthread (lauffähige Konfigurationen) Desktop schon sagt, während hier Anfragen behandelt werden.

    Gruß
    Al6042

    Keine Unterstützung per PN oder Pinnwand... Eure Anfragen gehören ins Forum, nicht in mein Postfach!

  • Hallo @georgz und auch von mir ein herzliches Willkommen!


    Was genau funktioniert denn nicht? Hast du eine Fehlerbeschreibung oder Screenshots?

    Mainboard: ASUS PRIME Z270-A • CPU: Intel Core i7-6700K • Grafikkarte: Saphirre HD 7870 GHz Edition 2GBOpenCore

  • 1erste Phase geht so weit (boot von USB, Clean OSX install auf m.2 NVMe SSD
    dann wenn OSX das 2te mal startet und die Installation fertig ist, habe ich die Probleme:


    und zwar wird die EFI Konfiguration von der Festplatte nicht funktionsfähig. D.H. config.plist etc sind nicht mit den benötigten settings bestückt


    Workaround ist config.plist vom USB Boot Stick benutzen


    Hier jetzt meine Frage
    Wie geht das automatisch? dh nach dem Setup von OSX habe ich früher mit multibeast gearbeitet und alles war OK


    mit 10.12.3 scheint das etwas zu klemmen ...


    meine Konfig


    GA-Z170_UD5 TH Bios F5 Intel 6600k 16GBRam
    Nvidia GeForce GTX 750ti 2GB
    NVMe 480GB Patriot (Install USB config.plist gepatcht um NVMe treiber bei der Installation zu haben)
    boot args: dart=0
    Install mit USB Clover/OSx 10.12.3
    Boot OK
    install OSX OK (NVMe drive ist da und funktioniert ;)
    reboot via USB auf m.2 SSD
    dann clover update auf 4.035
    und config.plist update (boot flags, etc)


    reboot OHNE USB -> parken verboten
    reboot mit InstallUSB -> geht auf m.2 SSD


    ;(((

    2 Mal editiert, zuletzt von georgz ()

  • Hallo. Ich bin gerade dabei meine dsdt.aml zu patchen. Klicke ich auf "Compile" zeigt er mir jedoch folgenden Fehler an:


    1, 4096, syntax error, unexpected $end, expecting PARSEOP_DEFINITIONBLOCK


    Wie bekomme ich den Fehler weg?

    Dateien

    • DSDT.aml

      (113,66 kB, 91 Mal heruntergeladen, zuletzt: )

    Einmal editiert, zuletzt von thehawk ()

  • @bigben24 Und um welche Hardware handelt es sich bei deiner Möhre?
    Btw: Ist das ein interner oder externer Link und kann es sein dass du evtl. etwas falsch verstanden hast, das teilen mit der Community von technischen Daten?

  • Guten Morgen,
    ich verstehe Deine Frage nicht ganz, die Harwaredaten stehen doch links unter meinem Namen und die EFI war zu groß um sie hier hochzuladen, deshalb der externe Link. Ist das nicht korrekt hier technische Daten zu teilen? Ich denke das ist doch der Sinn dieses Faden,oder?

  • @bigben24
    Schau dir die anderen Beiträge nochmal an. Dann wirst du merken wie der Thread aufgebaut ist. :)
    AM Handy sehe ich deine Hardware Daten und dein Profil zum Beispiel überhaupt nicht ;)

  • OK verstehe, dann werde ich das mal noch ergänzem :-)

  • Hiho Leutz,
    dauert nimmer lang, dann werd ich mich auch wieder an nem Hacki versuchen, derzeit bin ich am Infos sammeln.
    Eine Sache, über die ich jetzt schon öfter gestolpert bin, ist die GraKa.
    Da & dort gibt's Probleme mit den NVIDIAs.
    Ich denk mal, dass S bzw HS rauf kommt.


    die angedachte Hardware:
    i5-6600
    2x4GB 2100 RAM
    Asrock H110M-HDV (wird mglw ein GA-Z170 M oder N)
    und ne GTX660Ti (evga 3GB)

    Sehen ist nicht nur Augensache

    Coffee Lake Hack Prime Z390-A, i9-9900K,64GB, RX5700 XT

    (real-)Mac's: iMac27", MacPro 5,1 12Core

  • Die Nvidia GTX 660 sollte eigentlich keine Probleme bereiten und mit dem laufen was macOS Sierra und High Sierra mitbringen, das heißt du brauchst keinen WebDriver.
    Eigentlich ... meine GTX 660 läuft unter macOS Sierra einwandfrei aber unter High Sierra bekomme ich Artefakte ... also doch Probleme.
    Vielleicht stirbt meine Karte auch gerade, wobei unter den Versionen OS X Mavericks bis macOS Sierra alles normal läuft inklusive drei Monitor Betrieb.
    Eigentlich also ja. :D

  • @derHackfannull :thumbsup: mit dem "eigentlich" kann ich leben.
    Mich hat's eben nur stutzig gemacht, in meinem MP5,1 & Sierra und dem 2,1 & ElCap laufen die.

    Sehen ist nicht nur Augensache

    Coffee Lake Hack Prime Z390-A, i9-9900K,64GB, RX5700 XT

    (real-)Mac's: iMac27", MacPro 5,1 12Core

    Einmal editiert, zuletzt von seefew ()

  • On the GIGABYTE GA-B150N motherboard Phoenix-WIFI I used Mojave to install:


    - drivers64UEFI - picture 1


    - kext/Other - picture 2


    Everything is packed in the Clover folder, where it is config.plist.


    The Internet works right after installation, Graphics is on HD530 - 1920x1080


    Sound: After installation, it does not work. I installed VoodooHDA-2.9.0-Clover-V12-master - picture 3.


    Please note that installing Mojave in Customise before installing !!


    After installing Voodoo, set Output + Sound Effects HDMI.


    But there is no volume control on the top bar, so I installed the MonitorControl utility. Super controls both the sound and the contrast of the monitor. You must allow access to the installation after the PC is started.


    Good luck :thumbup:

  • Hi @Politic


    since this is not a complete Install manual I added it to this collective thread.


    But why are your using AppleALC in your EFI and also install VoodooHDA?
    That does male no sense, since the ALC892 form your board should work flawlessly with the AppleALC, if the settings in your config.plist are correct or using a patched DSDT.aml.

    Gruß
    Al6042

    Keine Unterstützung per PN oder Pinnwand... Eure Anfragen gehören ins Forum, nicht in mein Postfach!