Yosemite is not booting

  • Hello,
    I created a bootable stick with Unibeast,
    Multibeast wurde auf den Stick kopiert.


    I booted from the stick (Chimera Boot Screen) and Installed Yosemite on my ssd 250GB


    Postinstallation using Multibeast.
    I did that on the pc maybe this was wrong.


    ??? Should I do that on my mac???


    Because after reboot from the pcmac there stops the system by booth1
    Now what to do.
    Thanks in advance



    :S

    pcmac:
    Board: GA-z87X-UD4H Gigabyte
    CPU i5-4670K 3,4GHz
    Grafik NVIDIA GeForce GTX 660 Ti



    8)

  • Thanks for the link.
    Question:
    To do this on the mac??? Or on the Gigabyte Board???
    The Identifier from my partition is pcmac
    If I do not right understand:
    I go to the normals usb stick and on that stick I write
    the sentence: dd if......
    ???

    pcmac:
    Board: GA-z87X-UD4H Gigabyte
    CPU i5-4670K 3,4GHz
    Grafik NVIDIA GeForce GTX 660 Ti



    8)

  • on Your Hackintosh :)


    i will translate the Tutorial in English when i find the time for that :) maybe thats easier for you

  • Ich kann wohl auch in German schreiben:


    Habe die Partition pcmac deaktiviert!


    I write the identifier from the pcmac ssd:


    GUID ..... disk0
    EFI disk0S1
    pcmac disk0S2
    Apple Boot Recovery HD disk0S3


    Identifier from the usb stick wiht boot1h


    FDisk disk8
    DOSFAT32 W7BOOTCAMX disk7S1


    when ich jetzt auf den Stick gehe: cd /Volumes/W7BOOTCAMX
    keine Fehlermeldung
    dann
    dd if=booth1 of=/dev/pcmac dann kommt die Meldung: dd: /dev/pcmac: operation not supported


    Bitte melden

    pcmac:
    Board: GA-z87X-UD4H Gigabyte
    CPU i5-4670K 3,4GHz
    Grafik NVIDIA GeForce GTX 660 Ti



    8)

  • Hi,


    nein, habe ich wohl nur falsch in die Antwort geschrieben. Habe gerade nochmal ausgeführt. Gleiche Fehlermeldung.
    Wie kann ich denn feststellen, ob ich wirklich auf dem Stick bin?

    pcmac:
    Board: GA-z87X-UD4H Gigabyte
    CPU i5-4670K 3,4GHz
    Grafik NVIDIA GeForce GTX 660 Ti



    8)

  • take a picture of what the terminal displays if you type diskutil list

  • please disconnect everything but the usb stick and your os x Drive and then run the command again thx

  • nein ich meine wenn alles ausser der stick und die os x platte abgesteckt ist noch mal in Terminal diskutil list eingeben und davon dann ein Bild machen wenns geht richtig rum :D

  • Hier nochmal. ganz oben ist die ssd mit dem pcmac, dann der stick mit der datei boot1h und dann der Bootstick
    ich mache dann schluss. bin müde.
    melde mich evtl. morgen.
    Danke für die Mühe.


    Frage noch zu dem Multibeast: Nach der Neuinstallation habe ich das noch nicht durchgeführt. Muss ich das noch machen? Mache vorher dann noch ne Sicherung.
    Bei dem Multibeast müssen mehrere Angaben gemacht werden, die verstehe ich nicht alle.


    Gute Nacht

  • Auf alle Fälle ein Bootloader:D


    FakeSMC muss auch noch mit rein.. das sind so die ersten Sachen die Wichtig sind.

    Gruß CrusadeGT


  • Grüss Gott miteinander,
    Jetzt habe ich Yosemite installiert und muss noch Multibeats anwenden. Welche Einstellungen nehme ich dort denn vor?
    EasyBeast? DSDT Free?
    Ich verstehe nix.

    pcmac:
    Board: GA-z87X-UD4H Gigabyte
    CPU i5-4670K 3,4GHz
    Grafik NVIDIA GeForce GTX 660 Ti



    8)

  • EasyBeast würde ich komplett weg lassen..
    Wenn du Chimera nutzen willst dann als erstes mal:


    -Chimera
    -FakeSMC (Vorerst ohne Plug ins)


    Wenn er dann normal hoch fährt kannst du dich um Ethernet und Sound kümmern

    Gruß CrusadeGT


  • griven

    Hat das Label Erledigt hinzugefügt