Suchergebnisse
Suchergebnisse 1-20 von insgesamt 25.
-
(Zitat von haingo)I have Huananzhi X79 and I have everything working. I have attached the EFI you can take a look. You will have to add your Patched DSDT (Don't use mine. You can use it if you are using 6 Cores and 12 Thread cpu and chinese motherboard then you can use mine. If you are using more than 6 Cores and 12 Thread cpu then use the DSDT_ORALIA..aml included with the EFI and then edit it according to your cpu cores.) Also use your SSDT-PM. Also generate new platform Info
-
(Zitat von haingo)Don't use cputscsync 1.0.5. You can use 1.0.3Use you own DSDT (You can use it if you are using 6 Cores and 12 Thread cpu and chinese motherboard then you can use mine. If you are using more than 12 cores then use the DSDT_ORALIA..aml included with the EFI and then edit it according to your cpu cores. )1. Create a DSDT using ssdttime in windows and then use Rehabman's MacIasl to remove the unused cores like SCK1, SCK2, SCK3. I have 6 core and 12 threads so I removed the rest lea…
-
(Zitat von haingo)1. Yes I have everything working. You give me your DSDT created in windows using ssdttime.exe and I will edit the cores and send you the patched DSDT. Also I will try to add the Audio Patch2. I am only using SSDT-PM, SSDT-PLUG and SSDT-PMC for powermanagement and it worksAlso I just upgraded to Monterey 12.1 without any issue.
-
(Zitat von haingo)I just need to know one thing...1. Have you tried to install Mac?2. Because I didn't do any DSDT editing for installing Mac...It is only after installing the mac that I did the DSDT Patching with the help from MaLd0n.
-
(Zitat von haingo)Both the DSDT are for 8 Core 16 Thread CPU Dual CPUDSDT.aml (Only Modified CPU and Audio)DSDTFULLYPATCHED.aml (Patched Audio, CPU, HPET, USBX, EC and other fixes) All the fixes that I already use.
-
(Zitat von haingo)Did you try to use my EFI Folder?Please use my EFI Folder just remove the UT Map.kext and use your UTBkext.map. You can create this in windows using USBToolboxAlso use your SSDT-PMC and SSDT-PLUG created using SSDTTimePlease use my EFI Folder and only change the following. Rest keep it as isIn ACPISSDT-PMC (Create using Windows ssdttime)SSDT-PLUG (Create using Windows ssdttime)DSDTFULLPATCHEDand remove my SSDT-PM-ROBERT-2021 (No need of this while installing) You can create you…
-
(Zitat von haingo)PLUG, PMC, UNC and DSDT is enough. Rest everything is already added in DSDT.If you are unable to see your EFI then config.plist -> Misc -> Boot -> HideAuxiliraly Disable itAlso insert the pendrive in USB 2.0You are not able to even boot or you are stuck in boot screen or what is the error message ?
-
(Zitat von haingo)This error is fine as long as the installation is going forward. Is the installation going forward?If you are stuck then don't use PLUG, PMC AND UNC
-
(Zitat von haingo)1. Just use the DSDT and check. Also try 3 to 4 times sometimes it gets stuckAlso try resetting the nvram.2. If only using DSDT doesn't work then remove DSDT and only use SSDT-PMC, SSDT-PLUG and SSDT-UNC.3. If the above two doesn't work then let me know
-
(Zitat von haingo)Create the UTBMap.kext using USBToolbox app and then replace the one that I have included. Also keep in mind you need the UTBDefault.kext and UTBToolbox.kext which I have already included in my EFIAlso we will try the Audio patch later if it doesn't work.Also please give me the cpu bios name you can find this in the device manager in windows.I think your cpu might be using SCK2 hence you got the error. I thought earlier that your PC might be using SCK0 and SCK1.
-
(Zitat von haingo)My bad...I thought you have dual cpu setup...Let me edit it for single CPU...Also is the setup going through?So you have single CPU Motherboard or Dual CPU?
-
(Zitat von haingo)Please let me know what is the bios name for second cpu then we can edit the DSDT accordingly.
-
(Zitat von haingo)OK get everything installed then we will see what to do
-
Guys those who are having X79 Motherboard and havingIssue with HTUnable to boot to MacJust use my EFI and it will boot without any issue. This EFI will work for both Dual CPU and Single CPU Board.Please add you own Platform InfoAlso please add your UTBMap.kext file created using USBToolbox from windows(Use the windows.exe from there). Please don't use my UTBMap.kext it may not work.Please don't change any settings in config. It will go smoothly.BootEnjoy....!!!If PowerManagement is not working t…
-
You completely deleted the EFI Folder and tried the above one right?In the bios setting try to enable XHCI Handoff and EHCIHandoff option. If it is enabled then try disabling it and check.(Zitat von haingo)
-
(Zitat von haingo)After installing we will try to enable dual CPU. But with the latest EFI you should be able to boot in with Dual CPU. No worries we will see. After installing we will try the Patched DSDT
-
(Zitat von haingo)What happens when you try the EFI from the author of this thread?
-
(Zitat von haingo)OK first finish installing Mac then we will try to modify your DSDT
-
Now create SSDT-PMC, SSDT-PLUG, and SSDT-PM and place it in your ACPI folder(Zitat von haingo)
-
Now add SSDT-UNC, SSDT-EC-DESKTOP and disable SSDT-X79 and check if it's working(Zitat von haingo)