Suchergebnisse
Suchergebnisse 1-5 von insgesamt 5.
-
Hi,after updating HS my WOL stopped working. It worked for sure in El Capitan, not sure in what version of HS stopped to work. I'm using Ozmosis as bootloader and IntelMausiEthernet (in S/L/E) for network. I created ssdt.aml with ssdtPRGen, and put it in EFI/Oz/Acpi/Load/.WOL is enabled in BIOS, wake for network access is checked(Quelltext, 18 Zeilen) If I put machine to sleep, WOL works for a short time, but not working if I let it sleep for a while.WOL packet is reaching the machine from LAN a…
-
I use darkwake=0 since 10.9 and it worked before. Didn't try other values.In energy saver there are checks at "Put hard disks to sleep..." and "Wake for Ethernet...".There is an interresting thing in kernel log when going to sleep:2018-05-11 15:58:34.550248+0200 0x76 Default 0x0 0 0 kernel: (AppleCredentialManager) AppleCredentialManager: powerStateWillChangeToGated: SYSTEM WILL SLEEP.2018-05-11 15:58:34.550314+0200 0x151 Default 0x0 0 0 kernel: (AppleCredentialManager) AppleCredentialManager: h…
-
(Zitat)WOL works now. What I did:1. Installed AppleIntelE1000, didn't work, reinstalled IntelMausiEthernet. WOL didn't work.2. Installed latest FakeSMC sensors and went through BIOS settings. Turned on Intel Rapid Start and checked in Network Adapter that WOL is turned on there also. WOL worked but no sensors in HW Monitor.3. Reinstalled old Sensors and rebooted. WOL still works4. Turned off Intel Rapid start in BIOS. WOL still works!So, I have exactly the same setup as before but WOL is working…