Beiträge von fabiosun

It is inside an EFI partition then you have an EFI folder

then another EFI folder with BOOT and OC

it is wrong in this way

and it seems you mixed also with stuff useful to boot windows

Does windows start?

if so

1) open CMD as admin

2) diskpart

3) list disk

4) be sure which one is OSX disk (ie disk 2)

5 sel disk 2

6) sel part 1

7)assign letter=b

in this way you assign a letter to your EFI partition and this will mount your OSX EFI partition

to see inside you have to use or total commander or OCAT or browse it with Task manager browse (i use this method)

you can copy or modify things to recover any problems

ps

If you are confident reading this instructions you can proceed , otherwise do nothing

Dr-C Probably software hasnt clone your OpenCore EFI

you can check it also in windows

Kalypso478 that kext is availabel in many EFi in Hardware section of this forum

Wolfe

I mean to select the menu option (in blu)as you can see in my first screenshot

Hi to all

could you test this on an Intel or arm OSX 14.1 RC rig?

open preview app

then set from view menu show markup toolbar:

then from toolbar click on Show Form Filling Toolbar:

then on convert button:

and if you like post if it works or not for you:

PS

14.0 and 14.1 B1 and B2 works fine here

Sonoma RC all is fine for AMD CPU

no apfel-baum no good idea because often those update solve some problems

I have written also here because former download-fritz follow this forum and maybe it could be solved in Opencore bootloader before adding other patches for AMD system

Opencore devs does not support directly AMD CPU but if some coder/dev propose solution they listen and help (if it is not against their bootloader roadmap)

Hi

New bios upgrade for Asus x670E hero motherboard breaks compatibility with OSX.

This bios has a initial support for incoming new AMD CPU and new agesa.

Others OS like Windows or UBUNTU aren’t affected by this big problem.

Attached opencore ‘s sys report for both working and not working bioses (1602 vs 1709)

Any ideas?

Edit:

Obviously it is possible to downgrade easily to a working bios

Hi

i have this id for my I225:

i have also the same your wifi

I use oclp (0.69 or latest 1.0.0 /1.0.1) on my system in signature

the kext you say above works well as before

Beta3 on AMD CPU and OCLP 069 (i prefer latest nightly version)

https://swcdn.apple.com/conten…8ijp/InstallAssistant.pkg

Beta 2 (14.1) full installer from apple

full installer for beta 2 with runmedownloader app

for amd users the patches are always working

also OCLP works fine to patch moder wireless card

new shining beta 2

this winter my 6950Xt card will help to warm my office

simple blender rendering and above 100°

i will try to explain better

i use to have two OSX disk

one with Ventura and one with Sonoma

Ventura does no need to patch frameworks or kext to use Wifi/bt with my broadcom

Sonoma needs of many patches that OCLP does for us

so in config.plist you can say to opencore bootloader to apply the kext or the patches only to Sonoma

for this opencore use min/max kernel parameters

se my config in this pictures:

23.0.0 means to apply this kexts from Sonoma OSX and above

this means that opencore block this kext only for OSX from Sonoma and above

it is also possible to use multiple EFI using a tool (not supported i think from OC developer) bootloader chooser to have different EFI for different OS, but this is another story:)

Sorry for english but i am not able to write in german language

muse_83 you can prepare your config.plis (kext, block, amfi , SecurebootModel and SIP)

but frameworks must be patched in Sonoma OS

so you can adjust your EFI, then update to Sonoma OS, and only then you can run OCLP Sonoma version to patch Sonoma frameworks

if you use different OSX remember to apply min and max kernel to avoid problem in previous OS

in Sonoma 14.1 Continuity cam is working well again in my case..with latest 14 RC1 and RC2 it wasnt working

first 14.1 beta

Amd Kernel patches are doing their job as usual!