in boot menu press space and reset nvram
Beiträge von fabiosun
-
-
overwrite with this config
-
yes
have you formatted old working ssd?
i think we have to see back all your bios settings
Latest AMD kernel patches works well with Ventura and macOS Sonoma
Edit- I see thers one more ResizeGpuBars. This one also 0?
Booter/quirk
edit
try this EFI and post the result:
then iwill put only modified config.plist if EFI doesnt work
-
Fyynnn are you sure then 4g is ON?
because these two parameters in many bios are linked togheter
so set both on and put in your config.plist resizebar to 0 (it means on)
-
ReziseBar on or off?
your config is set to -1 so you have to put it to 0 or you can disable it on your motherboard bios
If you will use macOS Sonoma you have to start to deal with OCLP to use your Fenvi/Broadcom wifi card
-
check in your motherboard bios
UEFI
CSM
ResizeBar
and post the value you have
Previous working OSX was Ventura? now yohu are triyng to install sonoma OS from an USB pen installer?
-
Custom memory mapping is not active so, memory description is not used
Fyynnn could you explain better your problem and in which condition this happen?
I remember this was a working EFI with OS you used in the past
-
mitchde it seems no support for 6950 xt
Code- Neat Bench (Neat Image 9.1.0, Neat Video 5.6.0) MacOS x64
- Copyright (c) 1999-2023 Neat Image team, Neat Video team, ABSoft.
- All Rights Reserved.
- GPU detection log:
- Metal initialized successfully.
- Checking Metal GPU 1:
- GPU device name is: AMD Radeon RX 6950 XT
- 16368 MB total
- This device is not supported
- Check failed - will not use the device
- Neat Video benchmark:
- Frame Size: 1920x1080 progressive
- Bitdepth: 32 bits per channel
- Mix with Original: Disabled
- Temporal Filter: Enabled
- Quality Mode: Normal
- Radius: 2 frames
- Dust and Scratches: Disabled
- Repeat Rate: 0% of repeated frames
- Jitter Filtration: Normal
- Spatial Filter: Enabled
- Quality Mode: Normal
- Frequencies: High, Mid, Low, Very Low
- Artifact Removal: Enabled
- Edge Smoothing: Disabled
- Sharpening: Disabled
- Detecting the best combination of performance settings:
- running the test data set on up to 32 CPU cores
- CPU Model: AMD Ryzen 9 7950X 16-Core Processor
- 1 core: 5.94 frames/sec
- 2 cores: 12 frames/sec
- 3 cores: 16.7 frames/sec
- 4 cores: 21.9 frames/sec
- 5 cores: 25.8 frames/sec
- 6 cores: 29.1 frames/sec
- 7 cores: 32 frames/sec
- 8 cores: 34.3 frames/sec
- 9 cores: 37 frames/sec
- 10 cores: 39.2 frames/sec
- 11 cores: 40.9 frames/sec
- 12 cores: 41.8 frames/sec
- 13 cores: 43 frames/sec
- 14 cores: 41.9 frames/sec
- 15 cores: 41.8 frames/sec
- 16 cores: 44.4 frames/sec
- 17 cores: 42.9 frames/sec
- 18 cores: 44.1 frames/sec
- 19 cores: 40 frames/sec
- 20 cores: 40.8 frames/sec
- 21 cores: 35.6 frames/sec
- 22 cores: 40.8 frames/sec
- 23 cores: 37.7 frames/sec
- 24 cores: 39 frames/sec
- 25 cores: 38.1 frames/sec
- 26 cores: 36.1 frames/sec
- 27 cores: 32.3 frames/sec
- 28 cores: 33.3 frames/sec
- 29 cores: 31.5 frames/sec
- 30 cores: 30.7 frames/sec
- 31 cores: 28.7 frames/sec
- 32 cores: 27.5 frames/sec
- Best combination: 16 cores: 44.4 frames/sec
-
these are updated patches for your CPU
You have to add in your kernel patches config.plist section
-
with explorer++ as admin I can edit the EFI
update it (bootloader and kexts with OCAT as advised)
then posti it
Is it a full installer or a recovery installer?
if it is a recovery installer you have also to add a proper kext for your realtek ethernet card (not wifi but ethernet)
-
Der bringt nichts, ist für APUs mit Vega iGPU.
it works also with my rx 6950xt (nootRx)
I doubt his laptop will work, but as I said he has to adjust cpu related kernel patches
EDIT:
Efi posted by xpkiller (Hecatomb one) is not good for you (patches but also other reason like ethernet kext)
WIFI could be a big problem in your laptop, and an ethernet solution to install could be a better choice (if your laptop has one)
Opencore and kexts used are old (if you like to try macOS Ventura or Sonoma OS)
How have you build your OSX installer?
I repeat my self it could be an "impossible mission" but i f you have time to try could be also fun if you would have success
-
Frank
Your cpu is a six core one
You have to modify hecatomb Efi because his EFI is done for a 12 cores cpu
So you have to adjust kernel patches values from 0c to 06
then a laptop is a big challengeYou could have some change to have gpu acceleration using nootedred kext without using whavergreen kext
Some laptop users install their system initially booting in vesa mode and then using nootered kext to try to have it accelerated
-
-
-
Write:
sudo
Then drag and drop amdfriend file from where you have it
Then copy the remaking part of the command
or copy AMDFriend on your desktop and repeat command you did -
-
Why and for what Do you need AMDFriend? (sorry for this simple question)
Usually people need to have on AMD CPU some progrm working well Aas Adobe program or Autocad or Maja or Matcad or Matematica.....and i could go on with the list
if i have to patch ie Photoshop i use terminal and i execute:
so the script patch all MKL libs not compatible with AMD CPU
So do you need something similar to this?
EDIT if you fail to download it and installing it as the instructions posted in github help to do
you can use the release version:
https://github.com/NyaomiDEV/AMDFriend/releases/tag/v1.0.2
and in this way no need to use node js or all the procedure as instructions says to do
-
Valentin what would you like to do? Patch Adobe suite?
Link posted above is an educational one to do it.
to patch without knowing the theory you can use AMDFriend.
Developer released also a simple executable file
-
Nvidia is not supported from many years
Sorry
-
noAmd 6950xt is the best gpu supported