If anyone is interested my kext updated
Full changelog:
Fix SPDIF Out (please check) - change node to 45
Add Custom DSDT HDEF
Improve Front Headphones sound
Improve Front Mic sensitivity
Improve Line-In sound (please check)
Change Pin Config
Um schreiben oder kommentieren zu können, benötigst du ein Benutzerkonto.
Du hast schon ein Benutzerkonto? Melde dich hier hier an.
Jetzt anmeldenHier kannst du ein neues Benutzerkonto erstellen.
Neues Benutzerkonto erstellenIf anyone is interested my kext updated
Full changelog:
Fix SPDIF Out (please check) - change node to 45
Add Custom DSDT HDEF
Improve Front Headphones sound
Improve Front Mic sensitivity
Improve Line-In sound (please check)
Change Pin Config
ZitatTIMR, RTC, IPIC does not have to do with sound or DSDT-HDEF.
Many desktop computers work very well with external mic back and front. We're just trying to find a better solution for McRudolfo.
the effect is still there,but I'm not going to argue with you (I wanted to say that we should not forget about other components in General), I noticed that the this codec on different motherboards behave differently and one solution for all does not fit
Many desktop computers work very well with external mic back and front (Yes,but not in this codec)
the main problem because of what can not work both microphones ,no values Vref caps: HIZ 50 GRD 80 100 in the codec dump on the node of the microphone,it is impossible to prescribe the parameter MuteGPIO.
Can enable one-time at startup OS (1 of 2) add the node to the desired microphone additional verbs ( number codec ,number node,70721)
McRudolfo, sorry I misunderstood you)).....i think this possible,I have a problem I can't test linein
LineIn (Mask to microphone?)
MacPeet, 2 microphones together will not work,there is no possibility to automatically switch the hardware.....only 1 (front or back)
manual mode headphones most likely will not work too, like many other codecs,for this codec best alternative only VoodooHDA.
As I've said earlier, autodetect headphones/green out work fine for me.....you need to consider correct functioning things like HPET , TIMR,RTC,IPIC....it is possible that there is a problem with that
I doubt still) need to look in ioreg and log system
...back to the topic
Any Ivy Bridge imac 13.1-13.2 or Mac mini 6.2 (For correctly work speed step cpu and all system) this is for Desktop PC
i3 3225 (iMac13,1)Early 2013
HD 6850 use UEFI rom? or not? ....i use my gtx 780 (UEFI Rom) and i5 2300 (Sandy bridge) Mac Model 12.1-12.2 and work correctly.....CPU work more important for all system
ZitatiMac 12,1: i5 2400S, 2500S, i7 2600S, i3 3225
iMac 12,2: i5 / i7 SandyBrigde and AMD Radeon HD 6770M or Radeon HD 6970M (I have HD 6850)
but if it feels right then that's your thing
these models use different plugins for proper operation of the processor (PluginType 0 and 1) For correctly speed step
McRudolfo, change SMBios
McRudolfo, can you question offtopic ?
ZitatiMac12,2: Ga-Z77X-UD3H, i5-3450, Sapphire Radeon HD 6850, 8 GB DDR3 1600 MHz
iMac12,1: Asus H61M-K, i3-3225, HD 3000, 4 GB DDR3 1333 MHz
you have a typo ? mismatched components PC and SMBios
i3 3225 (HD 4000) Ivy Bridge Mac Model imac 13.1-13.2, i5-3450 Ivy Bridge Mac Model imac 13.1-13.2.........12.1-12.2 for Sandy Bridge
My New Patched AppleHDA 278.56 for macOS Sierra 10.12.2 ( pls check all ports)
need to swap the values and check SPDIF OUT
MacPeet, why need LineOut ? ....green port this is int speaker...line out (black and orange)
MacPeet,can make a manual shift mode as you suggest above.......also you can display the microphone on the rear panel and remove the front
Perhaps the sensitivity of the microphone will be better.....but that's my guess
About the problem autodetect on desktops I know....sometimes crashes like you say...but overall it works
p.s. viewed me patched kexts in network ..I have only seen the same inappropriate location amp ....that in General is bad for sound and other problems
MacPeet, for me autodetect headphones / green line out work fine on my GA-z77x-D3H Rev.1.1
McRudolfo, Yes, the microphone sensitivity is low but no noise....I spent a lot of time solving this problem and all to no avail
This codec TRASH Work fine only VoodooHDA ,don't AppleHDA
Look my patched VoodooHDA (my post up) there are almost no problems in ports and the microphone sensitivity is good
I think what i made in AppleHDA best among the other solutions which is in the network,but you could argue it's your right
MacPeet, some ports masked for that would have worked the other,hence there are not clear solutions in pin config.
For example, the implementation of 5.1 is possible but not stable,
because this codec is very bad for AppleHDA.Best alternative this is
VoodooHDA .Look my post up.
Maybe I misunderstood..... what is so bad autodetect headphones?
Check this please (SPDIF Out fix) ,change Platforms.xml.zlib in my patched AppleHDA Platforms.xml.zlib
Hi all, my patched kext on insanelymac forum ( include green out port rear,front headphones,front micro and work correctly......any all ports not checked), secret work front microphone in my pinconfig this item 22970721 (mode microphone on) see info.plist......
for multichannel use voodoohda kext