Beiträge von MrTrip

Zitat von al6042

Hi and welcome to the forum...

The Ozmosis ROMs for the Z170 Boards are not really working as expected, so we didn't really try anything else.

Also the current OZM version and the Ozmosis-Tools are not really capable of working with the AptioV-based ROMs for Sky-, Kaby- and Coffeelake Systems.

Since Clover is more flexible and adjustable, we prefer to use it as the bootloader for Skylake and above bases Mainboards.

I guess you better work with clover...

Alles anzeigen

Ah crud... I've never had luck with Clover... but I guess if that is my only option I'll have to give it a shot when I get the new hardware.

Thanks!

Hello all,

First off, mein deutsch ist nicht sehr gut, so I'll be posting this in English. If your replies must be in English that is fine.

I'm wondering if I want to be able to use Ozmosis with this motherboard? https://www.msi.com/Motherboard/support/Z270-GAMING-M7

A report on the latest bios flash shows bytes Free: 3DA714 (3945 KB) bytes Used: 5658EC (5526 KB) - so there is plenty of room for Ozmosis and probably all the kexts I'll need to make the system work.

I planned on going with the iMac 18,3 SMBIOS as that matches the processor.

The processor is Kaby Lake.

Will this be possible at all? I see that Z170 was done, but not Z270 yet.

Thanks!

Well, I figured it out. Dumping OZMTool on its face and using UEFITool I was able to inject Ozmosis and the things I needed, and all was well and good. Flashed, and currently back on Sierra. High Sierra was becoming a pain so I just went back to what is familiar

Danke! However, both of these files produce the "F2: Damaged Bios" error that I have been having with all BIOS created for High Sierra....

So I'm not having any luck with creating my own flash... every single time I do I get an F2 Bios error, damaged bios.

I can take an already working BIOS flash, extract OZM from it and then recreate it and it is still corrupted.

I've been working on this for the past 12 hours and I have no idea what is wrong....

I've downloaded the latest bios from MSI, I tried to apply Ozmosis to it, once I get that applied I flash the BIOS and I get an F2 error. The High Sierra ready BIOS here in the downloads section also has the same error. The previous bios does not, but I have no sound with that because it does not have the VoodooHDA module loaded....

Not sure what to do now =\