Beiträge von iTTT
-
-
[user = '37048'] iTTT [/ user] The PowerPlay table is passed as the property with the property "PP_PhmSoftPowerPlayTable". How or with what you bring to the graphics card is irrelevant to the function. Both Clover and OpenCore can pass Device Properties. Alternatively, you can do it with a Codeless Kext or SSDT. For the latter, however, one would have to convert the format.
With SSDT it looks something like this:
[Attach = '110812', 'none', 'false'] [/ attach]
Vielen Dank.
Kann ich wissen, wie man eine SSDT für meine Radeon VII erstellt?
Ich habe die Daten gemäß angehängter Datei eingestellt.
Danke noch einmal.
[Attach = 110905] [/ attach]
-
Ich benutze Radeon VII mit OpenCore.
ist es möglich, diesen Tweak in Zukunft in OpenCore zu verwenden?
-
EFI for system which is not related to your setup ... [user = '37048'] iTTT [/ user]
yes i know. i just want to check and learn to make my own setting.
my setup:
X299 Deluxe II
Radeon VII
i9-9920X
attached file for your reference.
i can not boot it with OC, not sure why ....
[Attach = 109877] [/ attach]
-
hello, i want to try OC for x299 Deluxe II.
could you pls kindly share OC EFI?
thanks in advance.
-
Use Hackintool to get the appropriate device path.
i searched and then used gfxutil -f gfx0 to show pci address.
PciRoot(0x20)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)
reboot and nothing change at all...so weird.
-
Yup, create a property inject on the Radeon VII PCI ID, create the property "PP_PhmSoftPowerPlayTable" as Data and paste the Clover Output. HBM clock already on maximum, going higher than 1100MHz does not give you any increase in scores. If you like you can increase the GPU clock for better scores. You probably do not get that much higher since you can not reduce the voltage on macOS which causes a lot of heat with GPU overclocking. I am running mine air-cooled at 1849MHz right now.
Thanks Chris.
But it does not work.
may be it was caused by wrong Devices?
i am using Asus x299 Deluxe II and Radeon VII in the first PCIE slot.
-
looks great.
i am using Radeon VII with EK waterblock in Mojave.
so just copy those 'Clover Output' value and paste it to Clover Device?
thanks.
-
Moin,
das SMBIOS iMac13,2 funktioniert ohne Änderung des CPUTYPE sowohl mit Sandy als auch mit Ivy Bridge.
Du musst also nicht an diesem Wert arbeiten.thank you
-
Mainboard : ASUS P8Z77-V Pro
CPU: i7-2600K Sandy Bridge
Ich bin mit SMBios iMac 13,2, die mit Ivy-Bridge-CPU, aber unter Verwendung von Sandy Bridge jetzt kommen sollte.
so brauch ich CPUTYPE zu OzmosisDefaults hinzufügen?
<Key> CPUTYPE </ key>
<Integer> 0x0601 </ integer>oben für Sandy-Bridge-CPU richtig?
Vielen Dank.
-
Gibt es die Möglichkeit Ozmosis für folgende Mainboards zu bekommen:
1. Hersteller: ASUS
2. Modell: Maximus IV Extreme
3. Chipsatz: Intel® P67
4. Bios: http://dlcdnet.asus.com/pub/AS…3672.696540969.1456367468