Sorry I dont translate your previous post.
Wait I must make new ROM for you.
Which rev you have?
Beiträge von crusher
-
-
Use and connect your PC on IGPU and install OS X and after instal OS X install WebDriver and add flag nvda_drv=1 restart PC go to bios and return your cable on your GPU GTX 980.
I hope you understand me. -
Use and update bootloader:
EDIT: Come to AppleALC - der dynamische AppleHDA Patcher theme to speack for your problem.
-
Yes I know. but easier for me to give you wikipedia link.
-
I say you you must use 1.0.13 and new flag for AppleALC -alcbeta.
-
Here you go to see how to go for 12,13 and etc.
https://sh.wikipedia.org/wiki/Heksadecimalni_sistem -
Yes this is hex of 11. ALC1150 work best with layput 11.
-
Guys you must use a hex of 11= 0B
-
Know. I have a same problem before but I have lucky Im a friend with vit9696 and vandroiy2012....
-
Here you go!!!!!! Yes and add flag -alcbeta
-
@Sascha_77 use patch for ALC1150 like this and use 1.0.13 version.
Alles anzeigenCode- Device (HDEF)
- {
- Name (_ADR, 0x001B0000) // _ADR: Address
- OperationRegion (HDAR, PCI_Config, Zero, 0x0100)
- Field (HDAR, AnyAcc, NoLock, Preserve)
- {
- DVID, 16,
- Offset (0x4C),
- DCKA, 1,
- Offset (0x4D),
- DCKM, 1,
- , 6,
- DCKS, 1,
- Offset (0x54),
- Offset (0x55),
- PMEE, 1,
- , 6,
- PMES, 1
- }
- Method (_DSW, 3, NotSerialized) // _DSW: Device Sleep Wake
- {
- Store (Arg0, PMEE) /* \_SB_.PCI0.HDEF.PMEE */
- }
- Method (GPEH, 0, NotSerialized)
- {
- If (LEqual (DVID, 0xFFFF))
- {
- Return (Zero)
- }
- If (LAnd (PMEE, PMES))
- {
- Store (One, PMES) /* \_SB_.PCI0.HDEF.PMES */
- Notify (HDEF, 0x02) // Device Wake
- }
- Return (Zero)
- }
- Method (_PRW, 0, NotSerialized) // _PRW: Power Resources for Wake
- {
- Return (GPRW (0x0D, 0x04))
- }
- Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method
- {
- Store (Package (0x10)
- {
- "AAPL,slot-name",
- "Built In",
- "name",
- "Realtek Audio Controller",
- "model",
- Buffer (0x21)
- {
- "Realtek ALC1150 Audio Controller"
- },
- "device_type",
- Buffer (0x11)
- {
- "Audio Controller"
- },
- "layout-id",
- Buffer (0x04)
- {
- 0x0B, 0x00, 0x00, 0x00 /* .... */
- },
- "PinConfigurations",
- Buffer (Zero) {},
- "MaximumBootBeepVolume",
- Buffer (One)
- {
- 0x40 /* @ */
- },
- "hda-gfx",
- Buffer (0x0A)
- {
- "onboard-1"
- }
- }, Local0)
- DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
- Return (Local0)
- }
- }
for Ozmosis this is it but for Clover add layout=11
-
Now Im back. I now see. Sry I was on vacation.
-
This ROM based on Ozmosis 167X-MASS
Support for El Capitan and Sierra -
Here you go:
https://www.hackintosh-inc.de/…g/?postID=22159#post22159Sorry I share my ROM with another site.
Sry again -
Here you go:
Z77 Pro4-M -
This ROM based on Ozmosis 167X-MASS
Support for 10.11.4 Later and Sierra -
He have a ROM in PM. This is good ROM but he need add nv_disable=1 in Defaults.plist before instalation WebDriver. Normal add nvda_drv=1 after install WebDriver.
-
Try with this ROM.
I replace just Defaults.plist
Yes and use AFUDOS/GAN for flash or flashback button if you have on your mobo. -
Use DSDT and Defaults of @al6042 and test this ROM
-
yup reason you dont have a space in ROM. Do you know how to use Ozmosis via bcfg command?
