Hello,
wo genau ist die plist für die 5GHz ? (ohne sich in den Link einzulesen)
LG
Um schreiben oder kommentieren zu können, benötigst du ein Benutzerkonto.
Du hast schon ein Benutzerkonto? Melde dich hier hier an.
Jetzt anmeldenHier kannst du ein neues Benutzerkonto erstellen.
Neues Benutzerkonto erstellenHello,
wo genau ist die plist für die 5GHz ? (ohne sich in den Link einzulesen)
LG
Hast Du diese Möglichkeit? (siehe Screenshot)
Ja, ich habe:
Broadcom BCM94360CD 802.11ac mini PCI-E WiFi WLAN Bluetooth 4.0 Card
Habe gehofft Dir helfen zu können da ich auch da durch gegangen bin, sorry.
LG
Sorry, hab das Screenshot verwechselt.
Dein Screenshot und mein Screenshot, zum vergleich
Lg
Hallo, bei mir sieht es so aus:
Softwareversionen:
CoreWLAN: 11.0 (1101.20)
CoreWLANKit: 11.0 (1101.20)
Menüerweiterung: 11.0 (1121.34)
Systeminformationen: 12.0 (1100.2)
IO80211-Familie: 11.1 (1110.26)
Diagnose: 5.1 (510.88)
AirPort-Dienstprogramm: 6.3.6 (636.5)
Schnittstellen:
en1:
Kartentyp: AirPort Extreme (0x14E4, 0x111)
Firmware-Version: Broadcom BCM43xx 1.0 (7.21.95.172.1a4)
MAC-Adresse: 78:31:c1:e9:37:e9
Locale: FCC
Länderkennung: AT
Unterstützte PHY-Modi: 802.11 a/b/g/n/ac
Unterstützte Kanäle: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Ruhezustand bei drahtlosem Zugriff beenden: Unterstützt
AirDrop: Supported, Channel 44
Status: Verbunden
Unterschied: meine Airport-Karte wird richtig erkannt und nicht wie bei Dir 3rd Party...
Hatte auch so einen Fehler, siehe: Handoff aktivieren
Habe die Systemdef. geändert und dann hat es auch funktioniert.
LG
Wie lautet Deine Systemdefinition: MacPro3.1 oder iMac?
LG
dann Punkt 1 wählen,Activate Continuity
zuerst System Diagnostic wählen
da sollte ein Punkt vorhanden sein, wie Test oder prüfen ob alle Vorgaben erfüllt werden
LG
im Terminal eintippen:
csrutil status
LG
al6042 weiß schon was er schreibt und welche Empfehlung er gibt
LG
mit der App "Continuity Activation Tool" mal testen und aktivieren.
LG
Hallo,
hat nicht @griven einmal vor kurzem erwähnt das es monentan nicht mit AMD geht sondern nur mit NVidia-Karten, die Funktion Sleep.
Bitte um Korrektur falls ich falsch liege.
Lg
PS: bin selber von AMD zu NVidia gewechselt und ohne weiteres ging auf einmal die Sleepfunktion
Leider keine Änderung
--- Hardware/OS checks ---
Verifying Continuity status... OK. OS X reports Continuity as active
Verifying Mac model reference... OK. Known compatible Mac Model detected: MacPro3,1
Verifying Mac board-id... OK. Short board id detected: Mac-F42C88C8
Verifying OS X version... Warning: This version of Mac OS X (10.11.4) is Experimental! Only partially tested on El Capitan
Verifying Wi-Fi hardware... OK. A Broadcom AirPort card is active, and is using the Continuity compatible Brcm4360 kext
Verifying AWDL status... OK. An AWDL interface is up, Wi-Fi is ready for Continuity
Verifying Bluetooth hardware... OK. The internal Bluetooth card is active
Verifying Bluetooth version... OK. Bluetooth 4.0 detected
Verifying Bluetooth features... OK. Bluetooth features are Continuity compliant
Verifying Bluetooth firmware... OK. Bluetooth firmware version: v118 c9123
Verifying Login Item... OK. Login item for Auto Continuity Check is not set.
--- Modifications check ---
Verifying OS kext protection... OK. Kext developer mode is not active. This tool can fix this.
Verifying SIP... Ok. System Integrity Protection is already disabled
Verifying ContinuitySupport... Print: Entry, ":Mac-F42C88C8:ContinuitySupport", Does Not Exist
NOT OK. Unknown state. Your Mac might not be compatible.
Verifying kexts readability... OK. Wi-Fi and Bluetooth kexts were found and could be read
Verifying Wi-Fi whitelist status... OK. The whitelist is correctly patched with your board-id
Verifying BT4 dongles compatibility... OK. Compatibility with BT4 USB dongles is not enabled, this tool can fix this if a dongle is plugged in
Verifying old Wi-Fi kext presence... OK. Legacy Wi-Fi driver Brcm4331 was already removed
Verifying legacy Wi-Fi card patch... OK. The patch is already done. Old Broadcom Wi-Fi cards may work.
LG
Hello,
das ist mein zweiter Hackintosh.
Das mit dem Handoff betrifft mein Hauptsystem.(siehe Signatur)
Hallo,
mein MacPro 3.1 läuft sehr gut bis auf eine Kleinigkeit.
Handoff geht nicht, Airdrop geht.
Fehler für mich die Mac-Board-ID.
--- Initiating system compatiblity check ---
--- Hardware/OS checks ---
Verifying Continuity status... OK. OS X reports Continuity as active
Verifying Mac model reference... OK. Known compatible Mac Model detected: MacPro3,1
Verifying Mac board-id... OK. Short board id detected: Mac-Fxxxxxx8
Verifying OS X version... Warning: This version of Mac OS X (10.11.4) is Experimental! Only partially tested on El Capitan
Verifying Wi-Fi hardware... OK. A Broadcom AirPort card is active, and is using the Continuity compatible Brcm4360 kext
Verifying AWDL status... OK. An AWDL interface is up, Wi-Fi is ready for Continuity
Verifying Bluetooth hardware... OK. The internal Bluetooth card is active
Verifying Bluetooth version... OK. Bluetooth 4.0 detected
Verifying Bluetooth features... OK. Bluetooth features are Continuity compliant
Verifying Bluetooth firmware... OK. Bluetooth firmware version: v118 c9123
Verifying Login Item... OK. Login item for Auto Continuity Check is not set.
--- Modifications check ---
Verifying OS kext protection... OK. Kext developer mode is not active. This tool can fix this.
Verifying SIP... Ok. System Integrity Protection is already disabled
Verifying ContinuitySupport... Print: Entry, ":Mac-Fxxxxxx8:ContinuitySupport", Does Not Exist
NOT OK. Unknown state. Your Mac might not be compatible.
Verifying kexts readability... OK. Wi-Fi and Bluetooth kexts were found and could be read
Verifying Wi-Fi whitelist status... OK. The whitelist is correctly patched with your board-id
Verifying BT4 dongles compatibility... OK. Compatibility with BT4 USB dongles is not enabled, this tool can fix this if a dongle is plugged in
Verifying old Wi-Fi kext presence... OK. Legacy Wi-Fi driver Brcm4331 was already removed
Verifying legacy Wi-Fi card patch... OK. The patch is already done. Old Broadcom Wi-Fi cards may work.
--- Modifications check ---
Die xxxxxx sind von mir gesetzt worden.
Laut Systembericht:
Bluetooth Low Energy wird unterstützt: Ja
Handoff wird unterstützt: Ja
Instant Hotspot unterstützt: Ja
AirDrop: Supported
Also die Voraussetzungen sind gegeben.
Laut Google sollte MacPro 3.1 nicht das Problem sein, würde aber auch eine andere Systemdefinition nehmen wenn nötig.
Hat jemand eine Idee wie ich Handoff zum laufen bringe?
VG