Upgrade möglich? Laufender Hacki auf Monterey oder Big Sur bringen -> jetzt auf Ventura

  • hallo lucifer ,

    gebe dem grafikkärtchen noch ein agdpmod=pikera als bootflag mit siehe - https://dortania.github.io/Ope…st/coffee-lake.html#nvram


    lg :)

  • Danke, das wars nicht, noch ist die rs580 im Rechner. Ich bin noch nicht an dem Punkt die Kiste neu zu installieren. Ich mache gerade nur den Stick fertig und wollte ihn gestern mal durchbooten lassen.


    Das klappt nun auch, er hatte sich nur verschluckt.


    Jetzt meckert er bei den USB Ports rum und kommt aus einer Schleife nicht heraus und das obwohl die Ports gemapped sind.


    Am Wochenende gehts richtig los, dann habe ich Zeit mich um die Kiste zu kümmern.


    Edit: Ich bearbeite die config mit XCode und hänge mal die derzeitige EFI an, falls jemand lust hat, bitte mal drüber sehen. Ich hab das seit vier Jahren nicht mehr gemacht, entsprechend seh ich grad den Wald vor Bäumen nicht.

    Seriennummer und System UUID entfernt in der Config.


    Edit:1 Fehler gefunden, Config->Kernel->Quirks stand auf YES muss auf NO.

    Dateien

    • EFI_Testing.zip

      (4,41 MB, 31 Mal heruntergeladen, zuletzt: )

    Gruß Lucifer

    MacMini 6.2 late 2012, 1TB Crucial MX200 SSD, 16GB, i7 3720QM, Intel HD 4000, 2x 24" Samsung TFT, MacOS 10.14.5 (Rente)

    MacBook Pro late 2012 13" 1TB Crucial MX500 SSD, 16GB, i5, Mac OS 10.14.5 (läuft)

    Apple Watch Series 5 44mm Space Grey, Iphone 12 512GB Space Grey (aktuell)

    Hacki: i9-9900k, 2TB Crucial P5, 64GB Crucial Ballistix, Gigabyte Z370 Aorus Ultra Gaming Wifi, AMD RX6800 16GB, MacOS 13.5.2 OC 094 | 1TB Crucial MX500 Windows 11, Be Quiet Pure Base 500, 3+1 Setup Samsung 4k + 3x 24" HD

    NAS: Synoligy Diskstation 4x14 TB Seagate Ironwolf, Syno RS4021xs 8X20TB Seagate Exos, HPE Proliant DL380 G9 4x2TB SSD (Raid 5) für Smart-Home | Datenbanken | PXE-Boot | TasmoAdmin | Influx 1.8 | Influx 2 | MySQL | Paperless NGX | Grafana | Calibre-Web | usw.

    Einmal editiert, zuletzt von lucifer ()

  • hallo lucifer ,

    du hast auch noch weitere programalternativen zur verfügung, die da wären plisteditplus https://github.com/ic005k/PlistEDPlus/releases


    falls du opencore nutzt , das wurde mir grade beim überfliegen nicht so ganz bewußt- wären auch noch die ocauxtools dafür nutzbar, https://github.com/ic005k/QtOpenCoreConfig/releases


    beides vom selben autor und free to use, systemplattformübergreifend ,


    lg :)

  • Ich danke dir, ich seh mir beides mal an. Ich hab für meine Mojave Installation damals CloverConfigurator benutzt. Die plist bei XCode zu laden ist schon schwer was anderes. Total unübersichtlich :)


    Der Stick bootet nun einwandfrei in die Installation. Ich wollte eigentlich erst am Wochenende anfangen, aber irgendwie hab ich schon die Finger im Rechner °°

    (SSD´s abklemmen (Die dürfen einfach nicht sterben!) M2-SSD rein und letzt fetz.)


    Nochmal eine doofe Frage: Jetzt identifiziert sich mein System mit Mojave als MacPro1.1, macht es Sinn die neue Installation auf MacPro7.1 zu stellen und kann ich meine Seriennummer weiter verwenden? iMessage ect ist mir sehr wichtig...

    Gruß Lucifer

    MacMini 6.2 late 2012, 1TB Crucial MX200 SSD, 16GB, i7 3720QM, Intel HD 4000, 2x 24" Samsung TFT, MacOS 10.14.5 (Rente)

    MacBook Pro late 2012 13" 1TB Crucial MX500 SSD, 16GB, i5, Mac OS 10.14.5 (läuft)

    Apple Watch Series 5 44mm Space Grey, Iphone 12 512GB Space Grey (aktuell)

    Hacki: i9-9900k, 2TB Crucial P5, 64GB Crucial Ballistix, Gigabyte Z370 Aorus Ultra Gaming Wifi, AMD RX6800 16GB, MacOS 13.5.2 OC 094 | 1TB Crucial MX500 Windows 11, Be Quiet Pure Base 500, 3+1 Setup Samsung 4k + 3x 24" HD

    NAS: Synoligy Diskstation 4x14 TB Seagate Ironwolf, Syno RS4021xs 8X20TB Seagate Exos, HPE Proliant DL380 G9 4x2TB SSD (Raid 5) für Smart-Home | Datenbanken | PXE-Boot | TasmoAdmin | Influx 1.8 | Influx 2 | MySQL | Paperless NGX | Grafana | Calibre-Web | usw.

  • lucifer

    die identifizierung des mac modells- geschieht über das smbios-systemproduktname grüner kreis, und die dort erzeugten -eingetragenen werte - und deine werte solltest du dann entsprechend von -der clover efi? ,- auf oc übertragen,

    - dazu gibt es verschiedene wege- die ocat bieten ein neues feature an, bei welchem du dein smbios aus clover übertragen kannst , pinker kreis oben


    - wenn du deine efi gesichert hast kannst du das ja mal -experimentierweise-. ausprobieren und vergleichen, ob das so funktioniert hat. das findest du im bereich "pi" roter kreis ,über dem punkt "uefi"


    siehe spoiler


    ansonsten ist händisch übertragen wohl angesagt


    lg :)

  • Soweit so gut :)


    M2 SSD ist eingebaut, Montarey ist installiert und läuft soweit bis jetzt super. Die ganze Klamotte war deutlich einfacher als damals.

    WLAN, Bluetooth out of the Box (Tenfi 909), Seriennummer und System UUID korrekt.


    Nur...


    Der Sound geht nicht °° AppleALC ist in der Efi vorhanden, oder muss der nach L/E?

    Gruß Lucifer

    MacMini 6.2 late 2012, 1TB Crucial MX200 SSD, 16GB, i7 3720QM, Intel HD 4000, 2x 24" Samsung TFT, MacOS 10.14.5 (Rente)

    MacBook Pro late 2012 13" 1TB Crucial MX500 SSD, 16GB, i5, Mac OS 10.14.5 (läuft)

    Apple Watch Series 5 44mm Space Grey, Iphone 12 512GB Space Grey (aktuell)

    Hacki: i9-9900k, 2TB Crucial P5, 64GB Crucial Ballistix, Gigabyte Z370 Aorus Ultra Gaming Wifi, AMD RX6800 16GB, MacOS 13.5.2 OC 094 | 1TB Crucial MX500 Windows 11, Be Quiet Pure Base 500, 3+1 Setup Samsung 4k + 3x 24" HD

    NAS: Synoligy Diskstation 4x14 TB Seagate Ironwolf, Syno RS4021xs 8X20TB Seagate Exos, HPE Proliant DL380 G9 4x2TB SSD (Raid 5) für Smart-Home | Datenbanken | PXE-Boot | TasmoAdmin | Influx 1.8 | Influx 2 | MySQL | Paperless NGX | Grafana | Calibre-Web | usw.

  • Sascha_77

    Hat den Titel des Themas von „Upgrade möglich? Laufender Hacki auf Monterey oder Big Sure bringen“ zu „Upgrade möglich? Laufender Hacki auf Monterey oder Big Sur bringen“ geändert.
  • lucifer

    nee, da mußt du ggf. das alcid="eine zahl" setzen welche das ist weiß ich natürlich nicht, ggf. reicht alcid=1 schon aus, ansonsten wäre ausprobieren anhand deines verbauten soundchips angesagt - https://github.com/acidanthera…ALC/wiki/Supported-codecs


    ist laut autor incomplete https://github.com/acidanthera/AppleALC/wiki


    lg :)


    edit-garnicht uninteressant ist der comment ganz unten bei https://github.com/acidanthera…ALC/tree/master/Resources

    vielleicht funktioniert das dann ja wieder

    " Controllers.plist

    Update 0xA2F0 to fix HDMI audio too (#761)

    10 hours ago "

  • Perfekt, hat auch dieses Mal geklappt :) ein einfaches alcid=1 hat gereicht, allerings beim AppleALC 1.6.7


    Bedankt, wie immer.

    Gruß Lucifer

    MacMini 6.2 late 2012, 1TB Crucial MX200 SSD, 16GB, i7 3720QM, Intel HD 4000, 2x 24" Samsung TFT, MacOS 10.14.5 (Rente)

    MacBook Pro late 2012 13" 1TB Crucial MX500 SSD, 16GB, i5, Mac OS 10.14.5 (läuft)

    Apple Watch Series 5 44mm Space Grey, Iphone 12 512GB Space Grey (aktuell)

    Hacki: i9-9900k, 2TB Crucial P5, 64GB Crucial Ballistix, Gigabyte Z370 Aorus Ultra Gaming Wifi, AMD RX6800 16GB, MacOS 13.5.2 OC 094 | 1TB Crucial MX500 Windows 11, Be Quiet Pure Base 500, 3+1 Setup Samsung 4k + 3x 24" HD

    NAS: Synoligy Diskstation 4x14 TB Seagate Ironwolf, Syno RS4021xs 8X20TB Seagate Exos, HPE Proliant DL380 G9 4x2TB SSD (Raid 5) für Smart-Home | Datenbanken | PXE-Boot | TasmoAdmin | Influx 1.8 | Influx 2 | MySQL | Paperless NGX | Grafana | Calibre-Web | usw.

  • ja, in letzter zeit gab es mucken mit dem applealc, da hat eine version nicht richtig funktioniert,- ob man dann die nächsthöhere version nehmen konnte- sprich eine version übersprigen ,das der fehler darin behoben worden ist- weiß ich grade nicht :)


    das passiert hinundwieder, auch gerne mal bei den networkstacks z.b. bei manchem realtek, kann aber auch atheros treffen usw...

  • Jepp, genau deswegen hat ich den 1.6.7 genommen, mit dem 1.6.8 hab ich genau von dem Problem gelesen.


    Jetzt läuft der Hacki wieder super und alles rennt. Ich bin begeistert. Die M2 SSD merkt man nochmal deutlich.


    Morgen wage ich mich die die RX580 raus zu werfen und die RX6800 rein zu tun. inclusive dem Bootarg.


    In den nächsten Wochen wird dann noch der i7 8700 gegen ein i9 9900K ausgetauscht (wenn ich einen günstigen finde).


    Dann sollte ich wieder up to Date sein.

    Gruß Lucifer

    MacMini 6.2 late 2012, 1TB Crucial MX200 SSD, 16GB, i7 3720QM, Intel HD 4000, 2x 24" Samsung TFT, MacOS 10.14.5 (Rente)

    MacBook Pro late 2012 13" 1TB Crucial MX500 SSD, 16GB, i5, Mac OS 10.14.5 (läuft)

    Apple Watch Series 5 44mm Space Grey, Iphone 12 512GB Space Grey (aktuell)

    Hacki: i9-9900k, 2TB Crucial P5, 64GB Crucial Ballistix, Gigabyte Z370 Aorus Ultra Gaming Wifi, AMD RX6800 16GB, MacOS 13.5.2 OC 094 | 1TB Crucial MX500 Windows 11, Be Quiet Pure Base 500, 3+1 Setup Samsung 4k + 3x 24" HD

    NAS: Synoligy Diskstation 4x14 TB Seagate Ironwolf, Syno RS4021xs 8X20TB Seagate Exos, HPE Proliant DL380 G9 4x2TB SSD (Raid 5) für Smart-Home | Datenbanken | PXE-Boot | TasmoAdmin | Influx 1.8 | Influx 2 | MySQL | Paperless NGX | Grafana | Calibre-Web | usw.

  • ggf. ist der bug bei 1.6.9 nightly draußen- versuch macht kluch- aber wissen tu ich das momentan auch nicht :)

  • Technisch ist der Thread wohl beendet, die Kiste läuft bis jetzt einwandfrei.

    Ich danke allen für die tolle Hilfe :)

    Damit ist der Rechner jetzt Up-To-Date :)

    Gruß Lucifer

    MacMini 6.2 late 2012, 1TB Crucial MX200 SSD, 16GB, i7 3720QM, Intel HD 4000, 2x 24" Samsung TFT, MacOS 10.14.5 (Rente)

    MacBook Pro late 2012 13" 1TB Crucial MX500 SSD, 16GB, i5, Mac OS 10.14.5 (läuft)

    Apple Watch Series 5 44mm Space Grey, Iphone 12 512GB Space Grey (aktuell)

    Hacki: i9-9900k, 2TB Crucial P5, 64GB Crucial Ballistix, Gigabyte Z370 Aorus Ultra Gaming Wifi, AMD RX6800 16GB, MacOS 13.5.2 OC 094 | 1TB Crucial MX500 Windows 11, Be Quiet Pure Base 500, 3+1 Setup Samsung 4k + 3x 24" HD

    NAS: Synoligy Diskstation 4x14 TB Seagate Ironwolf, Syno RS4021xs 8X20TB Seagate Exos, HPE Proliant DL380 G9 4x2TB SSD (Raid 5) für Smart-Home | Datenbanken | PXE-Boot | TasmoAdmin | Influx 1.8 | Influx 2 | MySQL | Paperless NGX | Grafana | Calibre-Web | usw.

  • lucifer Freut mich sehr, dass der Hackintosh gut funktioniert.
    Gib noch bitte kurz Rückmeldung, wie lange es für Dich gedauert hat, bis die EFI fertig war.
    Waren etwa zwei Stunden ausreichend Zeit?

    Hacken ⛏️⛏️
    Haken ✔️

    .

    anscheinend: es sieht so aus als ob, und wird wohl stimmen

    scheinbar: es sieht so aus als ob, stimmt aber nicht

  • Neee. Leider bei weitem nicht.

    Liegt aber daran das ich das das letzte mal vor drei Jahren gemacht habe und mein Englisch etwas verrostet ist.


    Insgesamt war es aber deutlich einfacher als damals, auch herrlich: das Update auf 10.12.2 lief ohne Probleme durch.


    Ich werde jetzt mein MiningRIG runterfahren, die RX6800 da raus holen und in den Hacki setzen, dann ist alles erledigt.


    Drückt die Daumen :)

    Gruß Lucifer

    MacMini 6.2 late 2012, 1TB Crucial MX200 SSD, 16GB, i7 3720QM, Intel HD 4000, 2x 24" Samsung TFT, MacOS 10.14.5 (Rente)

    MacBook Pro late 2012 13" 1TB Crucial MX500 SSD, 16GB, i5, Mac OS 10.14.5 (läuft)

    Apple Watch Series 5 44mm Space Grey, Iphone 12 512GB Space Grey (aktuell)

    Hacki: i9-9900k, 2TB Crucial P5, 64GB Crucial Ballistix, Gigabyte Z370 Aorus Ultra Gaming Wifi, AMD RX6800 16GB, MacOS 13.5.2 OC 094 | 1TB Crucial MX500 Windows 11, Be Quiet Pure Base 500, 3+1 Setup Samsung 4k + 3x 24" HD

    NAS: Synoligy Diskstation 4x14 TB Seagate Ironwolf, Syno RS4021xs 8X20TB Seagate Exos, HPE Proliant DL380 G9 4x2TB SSD (Raid 5) für Smart-Home | Datenbanken | PXE-Boot | TasmoAdmin | Influx 1.8 | Influx 2 | MySQL | Paperless NGX | Grafana | Calibre-Web | usw.

  • Tenfi 909? Was soll das sein? Rechtschreibfehler?

    Mit der vielfach gepriesenen Fenvi 919 läuft WLAN, aber kein Bluetooth. Du wärst meines Wissens somit der erste Benutzer, bei dem Bluetooth mit der Fenvi 919 unter Monterey läuft.

    Habe deshalb Monterey nur als Test-System nebenbei laufen. Lasse mich aber gern belehren, falls Bluetooth und Fenvi mittlerweile unter Monterey problemlos laufen sollten.

    Viele Grüße von bluebyte

  • Du hast Recht, es ist ein Rechtschreibfehler.

    Und ja, es ist die Fenvi T919 und nochmal ja, es läuft einwandfrei ich schreibe gerade mit der BT Tastatur. Sogar schon beim ersten Start zur IOnstallation wurde die Tastatur erkannt (und benutzt), sogar noch besser, selbst die Bootauswahl von OC lief damit, was unter 10.14 nie funktioniert hat. Das andere Gerät ist ein Trackpad was noch nicht benutzt wird, sich aber auch permanent zu Wort meldet.




    Edit: Auch meine andere Ausstattung läuft einwandfrei, falls es jemanden Interessiert:

    HyperX USB Mikro

    Elgato HD60S

    USB-Headset

    Wacom Grafiktablet

    Gruß Lucifer

    MacMini 6.2 late 2012, 1TB Crucial MX200 SSD, 16GB, i7 3720QM, Intel HD 4000, 2x 24" Samsung TFT, MacOS 10.14.5 (Rente)

    MacBook Pro late 2012 13" 1TB Crucial MX500 SSD, 16GB, i5, Mac OS 10.14.5 (läuft)

    Apple Watch Series 5 44mm Space Grey, Iphone 12 512GB Space Grey (aktuell)

    Hacki: i9-9900k, 2TB Crucial P5, 64GB Crucial Ballistix, Gigabyte Z370 Aorus Ultra Gaming Wifi, AMD RX6800 16GB, MacOS 13.5.2 OC 094 | 1TB Crucial MX500 Windows 11, Be Quiet Pure Base 500, 3+1 Setup Samsung 4k + 3x 24" HD

    NAS: Synoligy Diskstation 4x14 TB Seagate Ironwolf, Syno RS4021xs 8X20TB Seagate Exos, HPE Proliant DL380 G9 4x2TB SSD (Raid 5) für Smart-Home | Datenbanken | PXE-Boot | TasmoAdmin | Influx 1.8 | Influx 2 | MySQL | Paperless NGX | Grafana | Calibre-Web | usw.

  • wenn ich das richtig erinnere hatte mich monty gefragt ob ich eine mx im gebrauch hätte


    edit- monty erkennt auch die extratasten dieser logitech mk270

    dit 2 - naja einige aber nicht alle, könnte daran liegen das die vielleicht nicht alle zugeordnet sind

  • So nun bin ich endgültig zufrieden. Auch der Wechsel zur Radeon RX 6800 hat problemlos geklappt.



    Edit: Freunde der Nacht, diese Aktion hat mein Videoediting auf ganz neue Sphären geschoben. Ich konnte mich vorher auch net beschweren, 4K Editing ging, aber jetzt ist das sowas von Butterweich, ach, herrlich!

    Gruß Lucifer

    MacMini 6.2 late 2012, 1TB Crucial MX200 SSD, 16GB, i7 3720QM, Intel HD 4000, 2x 24" Samsung TFT, MacOS 10.14.5 (Rente)

    MacBook Pro late 2012 13" 1TB Crucial MX500 SSD, 16GB, i5, Mac OS 10.14.5 (läuft)

    Apple Watch Series 5 44mm Space Grey, Iphone 12 512GB Space Grey (aktuell)

    Hacki: i9-9900k, 2TB Crucial P5, 64GB Crucial Ballistix, Gigabyte Z370 Aorus Ultra Gaming Wifi, AMD RX6800 16GB, MacOS 13.5.2 OC 094 | 1TB Crucial MX500 Windows 11, Be Quiet Pure Base 500, 3+1 Setup Samsung 4k + 3x 24" HD

    NAS: Synoligy Diskstation 4x14 TB Seagate Ironwolf, Syno RS4021xs 8X20TB Seagate Exos, HPE Proliant DL380 G9 4x2TB SSD (Raid 5) für Smart-Home | Datenbanken | PXE-Boot | TasmoAdmin | Influx 1.8 | Influx 2 | MySQL | Paperless NGX | Grafana | Calibre-Web | usw.

  • Na wunderbar :(


    Ich habe das akutelle F15 BIOS für mein Board geflashed, da ich eine i9 9900K ergattern konnte, die CPU läuft erst ab F12, vorher Installiert war F11 (und sollte noch auf dem Backup BIOS sein)


    Nun startet Mac OS nicht mehr. Er bleibt gleich kurz nach dem Boot stehen.


    Letze angezeigte Zeile: SMCSuperIO ssio detecting device ITE IT8686E


    Ein paar Zeilen weiter oben jedoch das:

    ACPI Error Method parse/execution failed

    und

    AppleNVNe Assert failed


    Jemand eine Idee?

    Gruß Lucifer

    MacMini 6.2 late 2012, 1TB Crucial MX200 SSD, 16GB, i7 3720QM, Intel HD 4000, 2x 24" Samsung TFT, MacOS 10.14.5 (Rente)

    MacBook Pro late 2012 13" 1TB Crucial MX500 SSD, 16GB, i5, Mac OS 10.14.5 (läuft)

    Apple Watch Series 5 44mm Space Grey, Iphone 12 512GB Space Grey (aktuell)

    Hacki: i9-9900k, 2TB Crucial P5, 64GB Crucial Ballistix, Gigabyte Z370 Aorus Ultra Gaming Wifi, AMD RX6800 16GB, MacOS 13.5.2 OC 094 | 1TB Crucial MX500 Windows 11, Be Quiet Pure Base 500, 3+1 Setup Samsung 4k + 3x 24" HD

    NAS: Synoligy Diskstation 4x14 TB Seagate Ironwolf, Syno RS4021xs 8X20TB Seagate Exos, HPE Proliant DL380 G9 4x2TB SSD (Raid 5) für Smart-Home | Datenbanken | PXE-Boot | TasmoAdmin | Influx 1.8 | Influx 2 | MySQL | Paperless NGX | Grafana | Calibre-Web | usw.

  • hm, braucht es nun den nvmefix.kext? ansonsten bios neu einrichten-einstellen?