Vorke V8 Mini PC (i7-8750H): IGPU will nicht

NVRAM is working only as you also stated in your guide with AptioMemoryFix.efi... NVRAM definitely works..

I did verify it with terminal commands... sudo nvram StormTestVar=MyTest then reboot. After bootup StormTestVar remains in the nvram so it seems it is working, also iMessage works,and I dont have EmuVariableUefi installed. Here are my pm settings pmset -g (womp is enabled because i had strange ethernet dropouts in the past few weeks... trying to narrow down the cause...):

Currently in use:

standby 1

Sleep On Power Button 1

womp 1

autorestart 0

hibernatefile /var/vm/sleepimage

proximitywake 1

powernap 0

gpuswitch 2

networkoversleep 0

disksleep 0

standbydelayhigh 86400

sleep 0

hibernatemode 3

ttyskeepawake 1

displaysleep 60

tcpkeepalive 1

highstandbythreshold 50

standbydelaylow 86400

Just did what you suggested. Machine goes into sleep, monitor turns of, the power led on the minipc switches to red/blue for 1 time, then screen comes on with login window immediately. Pmset states sleep was prevented by UserEventAgent, backupd, powerd... I have Time Machine enabled, will try again with TM disabled.

Currently in use:

standby 1

Sleep On Power Button 1

womp 1

autorestart 0

hibernatefile /var/vm/sleepimage

proximitywake 1

powernap 0

gpuswitch 2

networkoversleep 0

disksleep 0

standbydelayhigh 86400

sleep 0 (sleep prevented by UserEventAgent, backupd, backupd, powerd)

hibernatemode 0

ttyskeepawake 1

displaysleep 60

tcpkeepalive 1

highstandbythreshold 50

standbydelaylow 86400

UPDATE

Tried again with TM disabled, result is below... Any suggestion?

Currently in use:

standby 1

Sleep On Power Button 1

womp 1

autorestart 0

hibernatefile /var/vm/sleepimage

proximitywake 1

powernap 0

gpuswitch 2

networkoversleep 0

disksleep 0

standbydelayhigh 86400

sleep 0 (sleep prevented by timed, powerd)

hibernatemode 0

ttyskeepawake 1

displaysleep 60

tcpkeepalive 1

highstandbythreshold 50

standbydelaylow 86400

UPDATE 2

Tried again, now pmset didnt show any information what process prevented sleep... The same happens as described above.

I attach the log about the sleep process...

Managed getting sleep to work. Problem was the Wifi/BT card (Dell DW1820), swapped it to BCM94360CS2.

After wake VDADecoderChecker, VLC, Videoproc dont work, after launching the app you only get a forever spinning beachball. Chrome, Youtube videos, sound, network, bt... are working after wake. Thank you so much for your help and cooperation.