Skylake Sammelthread (Hilfe und Diskussionen)

  • Well, it does not work, I did not have any audio driver after installation.
    When I installed VoodooHDA, HDMI was displayed in the audio settings. But without the volume control on the top bar - I'm installing the MonitorControl that you've been advising to me.
    In Clover.zip is Config.plist - do not know what DSDT setup should be there for the sound to go after the installation?

    Dateien

    • CLOVER.zip

      (3,61 MB, 70 Mal heruntergeladen, zuletzt: )
  • So, you only use VoodooHDA to get HDMI-Audio working?
    Please reboot your machine and use the F4-Button several times, while in Clover Bootmenu.
    This extracts the ACPI-Files out of the BIOS onto the EFI-Partition, but without optical or audio response.


    Check the directory /EFI/CLOVER/ACPI/origin after you've booted.
    In there should be a couple of .aml-Files and also the DSDT.aml.


    Please Zip the /origin-Folder and post it as attachment.

    Gruß
    Al6042

    Keine Unterstützung per PN oder Pinnwand... Eure Anfragen gehören ins Forum, nicht in mein Postfach!

  • Super over restart and F4 and in origin are these aml files. Here's a zip.

    Dateien

    • origin.zip

      (61,95 kB, 66 Mal heruntergeladen, zuletzt: )
  • Ok, then please try the following files.
    The patched DSDT.aml must go to /EFI/CLOVER/ACPI/patched.
    The config.plist must replace your current one, since all the DSDT-Patches set up in the old one, are now in the DSDT.aml itself.
    Please rename your old file to "config-org.plist" before you copy the new file.


    Also delete or unsinstall the VoodooHDA.kext and all the AddOns.
    Please check for a HDADisabler.kext, which might be installed, and delete it also.


    After deleting these kexts run the application Kext Utility to recreate the Kext Cache.

    Dateien

    • DSDT.aml

      (165,07 kB, 70 Mal heruntergeladen, zuletzt: )
    • config.plist

      (6,36 kB, 107 Mal heruntergeladen, zuletzt: )

    Gruß
    Al6042

    Keine Unterstützung per PN oder Pinnwand... Eure Anfragen gehören ins Forum, nicht in mein Postfach!

  • After the tutorial and change, the system did not boot.
    In the Clover USB installation on the Devices tab, I canceled the Audio Inject and marked resetHDA. I inserted a new Origin with aml in the installation file. And I made a new install.
    After installing, the HDMI setup already appeared in the audio setting and I did not have to install Voodoo.
    So super helped - I do not know what ???
    Examples of the EFI set


    Thanks for help :danke:

    Dateien

    • EFI.zip

      (4,03 MB, 72 Mal heruntergeladen, zuletzt: )
  • Maybe there was something else on your system which blocked the boot.
    Without a screenshot of the error message we'll never know... :)


    But since now everything is working as I had hoped have fun with your system... :D

    Gruß
    Al6042

    Keine Unterstützung per PN oder Pinnwand... Eure Anfragen gehören ins Forum, nicht in mein Postfach!

  • griven

    Hat das Label Erledigt hinzugefügt
  • Laufen hier denn schon Skylake Builds mit Mojave und Nvidia Grafikkarte? Zb mit der 980Ti?

    iPhone 15 Pro Max - 256GB
    iPad Pro 12,9“ - 128GB inkl. Pencil

    Mac Mini M1 - 2020, 16GB RAM, 1TB SSD

    Windows Tower - 16GB RAM, Ryzen5 5600X, RTX2070, WaKü

    PS5 Digital / Xbox Series X

  • Ahoj:hurra:

    Dann werde ich wohl bei High Sierra bleiben müssen^^

    iPhone 15 Pro Max - 256GB
    iPad Pro 12,9“ - 128GB inkl. Pencil

    Mac Mini M1 - 2020, 16GB RAM, 1TB SSD

    Windows Tower - 16GB RAM, Ryzen5 5600X, RTX2070, WaKü

    PS5 Digital / Xbox Series X

  • Laufen die Dinger mittlerweile sogut wie OBB? War ja längere Zeit nicht wirklich konstant aktiv hier im Board;(

    iPhone 15 Pro Max - 256GB
    iPad Pro 12,9“ - 128GB inkl. Pencil

    Mac Mini M1 - 2020, 16GB RAM, 1TB SSD

    Windows Tower - 16GB RAM, Ryzen5 5600X, RTX2070, WaKü

    PS5 Digital / Xbox Series X

  • Ich hab die RX570 in Gebrauch (vorher ne GTX970) und bin jetzt glücklich Webdriver-frei mit Mojave.

    Mainboard: ASUS PRIME Z270-A • CPU: Intel Core i7-6700K • Grafikkarte: Saphirre HD 7870 GHz Edition 2GBOpenCore

  • Jupp, ich bin froh diesen Schritt im März/April diesen Jahres gemacht zu haben.

    Mit meiner Vega56, die ich im zweiten Anlauf von Asus gekauft habe, bin ich super zufrieden.

    Gruß
    Al6042

    Keine Unterstützung per PN oder Pinnwand... Eure Anfragen gehören ins Forum, nicht in mein Postfach!

  • Jup.. meine RX 580 läuft komplett oob ohne irgendwelche Anpassungen und verrichtet einen guten Job! :)

    Gruß CrusadeGT


  • Ich habe meine gtx960 auch in den Ruhestand geschickt und gegen eine rx580 ersetzt. Ob sie komplett oob läuft kann ich garnicht ganz genau sagen, da lilu und WEG sowieso drin sind. Ansonsten drei haken in der config.plist ändern und die webtreiber deinstallieren, Karte tauschen und das war es!

    MacBook Pro: Retina 13" early 15


    Imac 14.2: GA B150M DS3P, I5 6500, RX 580 8GB, 16GB Ram

  • Klingt eigentlich schonmal sehr gut...:danke2:

    Laufen die Karten bei euch auch mit QuickSync ohne große Anpassungen? Wäre mir für FinalCut sehr wichtig, das bekomme ich mit meiner GTX980Ti einfach nicht hin;(

    iPhone 15 Pro Max - 256GB
    iPad Pro 12,9“ - 128GB inkl. Pencil

    Mac Mini M1 - 2020, 16GB RAM, 1TB SSD

    Windows Tower - 16GB RAM, Ryzen5 5600X, RTX2070, WaKü

    PS5 Digital / Xbox Series X

  • Sofern die iGPU als connectorless angebunden ist sollte das eigentlich kein Problem sein....

    Gruß CrusadeGT


  • Da gingen nun schon Stunden rein ohne jeglichen erfolg...mit meiner GTX980Ti ;(


    Würde sich da jemand erbarmen und mir die Tage ein wenig via TeamViewer helfen?:verneigen: Der Rest läuft ja nur dieses Feature will einfach nicht:cursing:

    iPhone 15 Pro Max - 256GB
    iPad Pro 12,9“ - 128GB inkl. Pencil

    Mac Mini M1 - 2020, 16GB RAM, 1TB SSD

    Windows Tower - 16GB RAM, Ryzen5 5600X, RTX2070, WaKü

    PS5 Digital / Xbox Series X

  • So unterschiedlich sind unsere Systeme ja nicht, bei mir hat es gereicht Lilu und WEG in die Kexte zu packen und in der Config.plist alles was mit dem Prozessor zu tun hatte zu löschen. Achso und die IGPU muss natürlich im Bios aktiviert sein.

    Ich habe das Gefühl, dass dadurch das unsere Systeme schon "gereift" sind vieles einfacher funktioniert, als bei den neueren Generationen.

    MacBook Pro: Retina 13" early 15


    Imac 14.2: GA B150M DS3P, I5 6500, RX 580 8GB, 16GB Ram