0:100 0:100 MemLog inited, TSC freq: 3400027269 0:100 0:000 CPU was calibrated with ACPI PM Timer 0:100 0:000 0:100 0:000 Now is 02.08.2020, 09:17:34 (GMT) 0:100 0:000 Starting Clover revision: 5119 (master, commit 0f5da727e) on American Megatrends EFI 0:100 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/sergey/src/Clover/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6] 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,FEFE345C-A9B6-475B-BA54-4495CFF9DEB8,0x28,0x64000) @D1A73A98 0:100 0:000 SelfDirPath = \EFI\BOOT 0:100 0:000 Clover : Image base = 0xCB29E000 0:100 0:000 SimpleTextEx Status=Success 0:100 0:000 === [ Get Smbios ] ============================== 0:100 0:000 Type 16 Index = 0 0:100 0:000 Total Memory Slots Count = 4 0:100 0:000 Type 17 Index = 0 0:100 0:000 SmbiosTable.Type17->Speed = 1333MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0 0:100 0:000 SmbiosTable.Type17->Vendor = Kingston 0:100 0:000 SmbiosTable.Type17->SerialNumber = 73289FD1 0:100 0:000 SmbiosTable.Type17->PartNumber = 99U5471-012.A00LF 0:100 0:000 Type 17 Index = 1 0:100 0:000 SmbiosTable.Type17->Speed = 1333MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1 0:100 0:000 SmbiosTable.Type17->Vendor = Kingston 0:100 0:000 SmbiosTable.Type17->SerialNumber = 6F28D7FE 0:100 0:000 SmbiosTable.Type17->PartNumber = 99U5471-012.A00LF 0:100 0:000 Type 17 Index = 2 0:100 0:000 SmbiosTable.Type17->Speed = 1333MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0 0:100 0:000 SmbiosTable.Type17->Vendor = Kingston 0:100 0:000 SmbiosTable.Type17->SerialNumber = 7528CBFE 0:100 0:000 SmbiosTable.Type17->PartNumber = 99U5471-012.A00LF 0:100 0:000 Type 17 Index = 3 0:100 0:000 SmbiosTable.Type17->Speed = 1333MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1 0:100 0:000 SmbiosTable.Type17->Vendor = Kingston 0:100 0:000 SmbiosTable.Type17->SerialNumber = 7528AAEA 0:100 0:000 SmbiosTable.Type17->PartNumber = 99U5471-012.A00LF 0:100 0:000 Boot status=0 0:100 0:000 Running on: 'MS-7676' with board 'Z68MA-ED55 (MS-7676)' 0:100 0:000 === [ GetCPUProperties ] ======================== 0:100 0:000 CPU Vendor = 756E6547 Model=306A9 0:100 0:000 The CPU supported SSE4.1 0:100 0:000 BrandString = Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz 0:100 0:000 The CPU supported turbo 0:100 0:000 MSR 0x35 40004 0:100 0:000 MSR 0xE2 before patch 1E008401 0:100 0:000 MSR 0xE2 is locked, PM patches will be turned on 0:100 0:000 MSR 0xCE 00081010_F0012200 0:100 0:000 corrected FLEX_RATIO = E0000 0:100 0:000 MSR 0x1B0 00000000 0:100 0:000 FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 0:100 0:000 MaxDiv/MinDiv: 34.0/16 0:100 0:000 Turbo: 36/37/38/38 0:100 0:000 Features: 0x779AE3BFBFEBFBFF 0:100 0:000 Threads: 4 0:100 0:000 Cores: 4 0:100 0:000 FSB: 100 MHz 0:100 0:000 CPU: 3400 MHz 0:100 0:000 TSC: 3400 MHz 0:100 0:000 PIS: 100 MHz 0:100 0:000 ExternalClock: 25 MHz 0:100 0:000 === [ GetDevices ] ============================== 0:100 0:000 GOP found at: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/AcpiAdr(0x80010100) 0:100 0:000 PCI (00|00:00.00) : 8086 0150 class=060000 0:100 0:000 PCI (00|00:01.00) : 8086 0151 class=060400 0:100 0:000 PCI (00|01:00.00) : 1002 68FA class=030000 0:100 0:000 - GOP: Provided by device 0:100 0:000 - GFX: Model=ATI Radeon HD 7300 Series (ATI/AMD) 0:100 0:000 PCI (00|01:00.01) : 1002 AA68 class=040300 0:100 0:000 - HDMI Audio: 0:100 0:000 PCI (00|00:16.00) : 8086 1C3A class=078000 0:100 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF 0:100 0:000 PCI (00|00:16.03) : FFFF FFFF class=FFFFFF 0:100 0:000 PCI (00|00:1A.00) : 8086 1C2D class=0C0320 0:100 0:000 PCI (00|00:1B.00) : 8086 1C20 class=040300 0:100 0:000 PCI (00|00:1C.00) : 8086 1C10 class=060400 0:100 0:000 PCI (00|00:1C.04) : 8086 1C18 class=060400 0:100 0:000 PCI (00|03:00.00) : 10EC 8168 class=020000 0:100 0:000 - LAN: 0 Vendor=Realtek 0:100 0:000 PCI (00|00:1C.05) : 8086 1C1A class=060400 0:100 0:000 PCI (00|04:00.00) : 1106 3403 class=0C0010 0:100 0:000 PCI (00|00:1C.06) : 8086 1C1C class=060400 0:100 0:000 PCI (00|05:00.00) : 1033 0194 class=0C0330 0:100 0:000 PCI (00|00:1D.00) : 8086 1C26 class=0C0320 0:100 0:000 PCI (00|00:1F.00) : 8086 1C44 class=060100 0:100 0:000 PCI (00|00:1F.02) : 8086 1C02 class=010601 0:100 0:000 PCI (00|00:1F.03) : 8086 1C22 class=0C0500 0:100 0:000 PCI (00|00:1F.05) : 8086 1C08 class=010185 0:100 0:000 === [ GetDefaultSettings ] ====================== 0:101 0:000 Clover load options size = 0 bytes 0:106 0:005 CheckOEMPathExists tried EFI\CLOVER\OEM\MS-7676--00-00-00-00-00-00. Dir not exists 0:106 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Z68MA-ED55 (MS-7676)\UEFI. Dir not exists 0:106 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\MS-7676. Dir not exists 0:106 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\MS-7676-3400. Dir not exists 0:106 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Z68MA-ED55 (MS-7676). Dir not exists 0:106 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Z68MA-ED55 (MS-7676)-3400. Dir not exists 0:106 0:000 set OEMPath by default: EFI\CLOVER 0:109 0:002 EFI\CLOVER\config.plist loaded: Success 0:109 0:000 === [ GetListOfThemes ] ========================= 0:110 0:001 - [00]: METAL 0:120 0:009 - [01]: RANDOM 0:121 0:001 - [01]: EMBEDDED 0:122 0:001 === [ Found config plists ] ===================== 0:122 0:000 - config.plist 0:122 0:000 === [ GetEarlyUserSettings ] ==================== 0:122 0:000 timeout set to 5 0:122 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:122 0:000 get BlueValue=1.200000 0:122 0:000 KextsToPatch: 6 requested 0:122 0:000 - [00]: com.apple.driver.usb.AppleUSBXHCI (Raise USB port limit) :: MatchOS: 10.14.x :: BinPatch :: data len: 9 0:122 0:000 - [01]: com.apple.iokit.IOUSBHostFamily (USB Port Limit Patch 1) :: BinPatch :: data len: 4 0:122 0:000 - [02]: com.apple.iokit.IOUSBHostFamily (USB Port Limit Patch 2) :: BinPatch :: data len: 4 0:122 0:000 - [03]: com.apple.driver.usb.AppleUSBXHCI (USB Port Limit Patch 3) :: BinPatch :: data len: 4 0:122 0:000 - [04]: com.apple.driver.usb.AppleUSBXHCI (USB Port Limit Patch 4) :: BinPatch :: data len: 4 0:122 0:000 - [05]: com.apple.iokit.IOGraphicsFamily (Boot graphics glitch 10.13.x (IGPUs)) :: BinPatch :: data len: 5 0:122 0:000 KernelToPatch: 3 requested 0:122 0:000 - [00]: Disable panic kext logging on 10.13 debug kernel (credit vit9696) :: MatchOS: 10.13.x :: data len: 6 0:122 0:000 - [01]: Disable panic kext logging on 10.13 release kernel (credit vit9696) :: MatchOS: 10.13.x :: data len: 6 0:122 0:000 - [02]: Disable panic kext logging on 10.14 release kernel (credit vit9696) :: MatchOS: 10.14.x :: data len: 6 0:122 0:000 Default theme: embedded 0:122 0:000 Hiding entries with string Preboot 0:122 0:000 === [ LoadDrivers ] ============================= 0:124 0:002 Loading FSInject.efi status=Success 0:126 0:001 Loading SMCHelper.efi status=Success 0:127 0:001 Loading VBoxHfs.efi status=Success 0:129 0:001 - driver needs connecting 0:129 0:000 Loading DataHubDxe.efi status=Success 0:163 0:033 Loading ApfsDriverLoader.efi status=Success 0:164 0:001 - driver needs connecting 0:164 0:000 Loading AudioDxe.efi status=Success 0:165 0:001 - driver needs connecting 0:165 0:000 Loading AptioMemoryFix.efi status=Success 0:167 0:001 3 drivers needs connecting ... 0:167 0:000 PlatformDriverOverrideProtocol->GetDriver overriden 0:167 0:000 APFS driver loaded 0:167 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 5:177 5:010 === [ InitScreen ] ============================== 5:177 0:000 Console modes reported: 4, available modes: 5:177 0:000 - [01]: 80x25 5:177 0:000 - [03]: 100x31 5:177 0:000 - [04]: 128x40 (current mode) 5:177 0:000 SetScreenResolution: 1920x1080 - not found! 5:177 0:000 SetMaxResolution: found best mode 2: 1024x768 5:177 0:000 - already set 5:177 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,FEFE345C-A9B6-475B-BA54-4495CFF9DEB8,0x28,0x64000) 5:177 0:000 new SelfHandle=D1A73A98 5:178 0:001 Using embedded font 5:179 0:000 === [ GetMacAddress ] =========================== 5:179 0:000 MAC address of LAN #0= 8C:89:A5:52:A7:F8: 5:179 0:000 === [ ScanSPD ] ================================= 5:179 0:000 Scanning SMBus [8086:1C22], mmio: 0xF7F04004, ioport: 0xF000, hostc: 0x1 5:199 0:019 Slot: 0 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=99U5471-012.A00LF SerialNo=73289FD1 5:218 0:019 Slot: 1 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=99U5471-012.A00LF SerialNo=6F28D7FE 5:237 0:019 Slot: 2 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=99U5471-012.A00LF SerialNo=7528CBFE 5:256 0:019 Slot: 3 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=99U5471-012.A00LF SerialNo=7528AAEA 5:256 0:000 === [ GetAcpiTablesList ] ======================= 5:257 0:000 Get Acpi Tables List from RSDT: 5:257 0:000 - [00]: FACP A M I len=132 5:257 0:000 - [01]: APIC A M I len=114 5:257 0:000 - [02]: FPDT A M I len=68 5:257 0:000 - [03]: MCFG A M I len=60 5:257 0:000 - [04]: HPET A M I len=56 5:257 0:000 - [05]: SSDT SataTabl len=877 5:257 0:000 - [06]: SSDT Cpu0Ist len=2474 5:257 0:000 - [07]: SSDT CpuPm len=2706 5:257 0:000 - [08]: BGRT A M I len=56 5:257 0:000 - [09]: BGRT A M I len=56 5:257 0:000 Calibrated TSC Frequency = 3400027269 = 3400MHz 5:257 0:000 === [ GetUserSettings ] ========================= 5:257 0:000 USB FixOwnership: yes 5:257 0:000 Dropping 3 tables: 5:257 0:000 - [00]: Drop table signature="DMAR" (52414D44) 5:257 0:000 ---- 5:257 0:000 - set table: 52414D44, 0 to drop: no 5:257 0:000 - [01]: Drop table signature="SSDT" (54445353) 5:257 0:000 table-id="CpuPm" ( 6D50757043) 5:257 0:000 ---- 5:257 0:000 - set table: 54445353, 6d50757043 to drop: yes 5:257 0:000 - [02]: Drop table signature="SSDT" (54445353) 5:257 0:000 table-id="Cpu0Ist" ( 74734930757043) 5:257 0:000 ---- 5:257 0:000 - set table: 54445353, 74734930757043 to drop: yes 5:257 0:000 - final DSDT Fix mask=00008004 5:257 0:000 PatchesDSDT: 7 requested 5:257 0:000 - [00]: (change GFX0 to IGPU) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:257 0:000 patch disabled at config 5:257 0:000 - [01]: (change LPC to LPCB) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:257 0:000 - [02]: (change SAT0 to SATA) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:257 0:000 - [03]: (Change PEGP to GFX0) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:257 0:000 - [04]: (change EHC1 to EH01) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:257 0:000 - [05]: (change EHC2 to EH02) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:257 0:000 - [06]: (change EC0 to EC) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:257 0:000 Using ProductName from config: iMac13,2 5:257 0:000 Found same BiosVersion in clover and config 5:257 0:000 BiosVersion: IM131.88Z.F000.B00.2004121616 5:257 0:000 BiosReleaseDate: 04/12/2020 5:257 0:000 Using EfiVersion from clover: 291.0.0.0.0 5:257 0:000 Using FirmwareFeatures from config: 0xE00DE137 5:257 0:000 Using FirmwareFeaturesMask from config: 0xFF1FFF3F 5:257 0:000 Board-ID set from config as Mac-FC02E91DDD3FA6A4 5:257 0:000 BoardType: 0xA 5:257 0:000 ChassisType: 0xD 5:257 0:000 Converted CustomUUID 475D01CF-9825-44F6-AB54-0904BEEEF3FA 5:259 0:002 === [ Found DSDT tables ] ======================= 5:886 0:626 === [ ScanVolumes ] ============================= 5:886 0:000 Found 8 volumes with blockIO 5:886 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 5:887 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,FEFE345C-A9B6-475B-BA54-4495CFF9DEB8,0x28,0x64000) 5:887 0:000 Result of bootcode detection: bootable unknown (legacy) 5:895 0:007 This is SelfVolume !! 5:895 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E76F52EC-F8B2-45CC-BB62-6A531F658340,0x64028,0xDF30B60) 5:896 0:000 Result of bootcode detection: bootable unknown (legacy) 5:896 0:000 - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E76F52EC-F8B2-45CC-BB62-6A531F658340,0x64028,0xDF30B60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,4FD1CBD53454854F9574117F21DA9403) 5:896 0:000 hiding this volume 5:896 0:000 - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E76F52EC-F8B2-45CC-BB62-6A531F658340,0x64028,0xDF30B60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,0C1942D4A137A7379E38D46E2E891C29) 5:896 0:000 - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E76F52EC-F8B2-45CC-BB62-6A531F658340,0x64028,0xDF30B60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,05F7637AB0574144924E11FF873F6F0F) 5:896 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E76F52EC-F8B2-45CC-BB62-6A531F658340,0x64028,0xDF30B60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,2BE9B31A97212B489A8E7C24B8F8D94C) 5:896 0:000 - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E76F52EC-F8B2-45CC-BB62-6A531F658340,0x64028,0xDF30B60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,7D750C9B34901F408A8D1A30C13C323A) 5:896 0:000 found 2 handles with audio 5:896 0:000 got index=2 5:897 0:000 got volume 0 5:897 0:000 Found Audio Device AMD (Unknown) (HDMI) at index 0 5:897 0:000 Found Audio Device Realtek ALC892 (SPDIF) at index 1 5:897 0:000 Found Audio Device Realtek ALC892 (LineOut) at index 2 5:897 0:000 Found Audio Device Realtek ALC892 (LineOut) at index 3 5:897 0:000 Found Audio Device Realtek ALC892 (LineOut) at index 4 5:897 0:000 Found Audio Device Realtek ALC892 (LineOut) at index 5 5:897 0:000 Found Audio Device Realtek ALC892 (Headphones) at index 6 5:897 0:000 Found Audio Device Realtek ALC892 (SPDIF) at index 7 5:897 0:000 === [ InitXTheme ] ============================== 5:897 0:000 use Daylight theme 5:897 0:000 using embedded theme 5:905 0:007 Channels: 2 Sample rate: 8000 Hz Bits: 16 5:905 0:000 output to channel 2 with volume 0, len=25600 5:905 0:000 sound channels=2 bits=16 freq=8000 5:905 0:000 sound play end with status=Not Found 5:906 0:001 Using embedded font 5:907 0:000 theme inited 5:907 0:000 Chosen embedded theme 5:907 0:000 after NVRAM boot-args=-v dart=0 darkwake=10 keepsyms=1 debug=0x100 radpg=15 agdpmod=ignore 5:907 0:000 === [ Dump SMC keys from NVRAM ] ================ 5:907 0:000 found AppleSMC protocol 5:954 0:046 Registered 16 SMC keys 5:955 0:000 === [ ScanLoader ] ============================== 5:955 0:000 - [01]: 'EFI' 5:963 0:007 AddLoaderEntry for Volume Name=EFI 5:963 0:000 skipped because entry is hidden 5:963 0:000 - [03]: 'Preboot', hidden 5:963 0:000 - [04]: 'Kingston120GB - Daten' 5:967 0:004 - [05]: 'Recovery' 5:968 0:001 AddLoaderEntry for Volume Name=Recovery 5:971 0:002 IconName=cata,mac comma=4 size=8 5:971 0:000 first=os_cata 5:971 0:000 Second=os_mac 5:971 0:000 Loader entry created for 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E76F52EC-F8B2-45CC-BB62-6A531F658340,0x64028,0xDF30B60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,05F7637AB0574144924E11FF873F6F0F)\9B0C757D-9034-401F-8A8D-1A30C13C323A\boot.efi' 5:972 0:001 - [06]: 'VM' 5:972 0:000 - [07]: 'Kingston120GB' 5:990 0:018 AddLoaderEntry for Volume Name=Kingston120GB 5:996 0:005 Check if volume Is Hibernated: 5:996 0:000 Check sleep image 'by signature': 5:999 0:002 using default sleep image name = \private\var\vm\sleepimage 6:000 0:001 sleepimage not found -> Not Found 6:000 0:000 hibernated: no - sign 6:000 0:000 IconName=cata,mac comma=4 size=8 6:000 0:000 first=os_cata 6:000 0:000 Second=os_mac 6:000 0:000 Loader entry created for 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E76F52EC-F8B2-45CC-BB62-6A531F658340,0x64028,0xDF30B60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,7D750C9B34901F408A8D1A30C13C323A)\System\Library\CoreServices\boot.efi' 6:002 0:001 Scanning legacy ... 6:002 0:000 === [ AddCustomTool ] =========================== 6:003 0:001 === [ GetEfiBootDeviceFromNvram ] =============== 6:004 0:000 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E76F52EC-F8B2-45CC-BB62-6A531F658340,0x64028,0xDF30B60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,7D750C9B34901F408A8D1A30C13C323A) 6:004 0:000 - Volume: 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E76F52EC-F8B2-45CC-BB62-6A531F658340,0x64028,0xDF30B60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,7D750C9B34901F408A8D1A30C13C323A)' 6:004 0:000 - LoaderPath: '' 6:004 0:000 - Guid = E76F52EC-F8B2-45CC-BB62-6A531F658340 6:004 0:000 === [ FindStartupDiskVolume ] =================== 6:004 0:000 - Volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E76F52EC-F8B2-45CC-BB62-6A531F658340,0x64028,0xDF30B60)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,7D750C9B34901F408A8D1A30C13C323A) 6:004 0:000 - searching for that partition 6:004 0:000 - found entry 1. 'Boot macOS from Kingston120GB', Volume 'Kingston120GB' 6:004 0:000 Boot redirected to Entry 1. 'Boot macOS from Kingston120GB' 6:004 0:000 BannerPlace at Clear Screen [448,68] 6:023 0:018 AnimeRun=0 6:044 0:021 GUI ready 12:053 6:009 === [ StartLoader ] ============================= 12:053 0:000 Finally: ExternalClock=26MHz BusSpeed=100001kHz CPUFreq=3400MHz PIS: hw.busfrequency=104000000Hz 12:053 0:000 start loader 12:053 0:000 Loading boot.efi status=Success 12:079 0:025 GetOSVersion: 10.15.6 (19G73) 12:079 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM 12:079 0:000 Filtering KextPatches: 12:079 0:000 - [00]: com.apple.driver.usb.AppleUSBXHCI (Raise USB port limit) :: BinPatch :: [OS: 10.15.6 | MatchOS: 10.14.x | MatchBuild: All] ==> not allowed 12:079 0:000 - [01]: com.apple.iokit.IOUSBHostFamily (USB Port Limit Patch 1) :: BinPatch :: [OS: 10.15.6 | MatchOS: All | MatchBuild: All] ==> allowed 12:079 0:000 - [02]: com.apple.iokit.IOUSBHostFamily (USB Port Limit Patch 2) :: BinPatch :: [OS: 10.15.6 | MatchOS: All | MatchBuild: All] ==> allowed 12:079 0:000 - [03]: com.apple.driver.usb.AppleUSBXHCI (USB Port Limit Patch 3) :: BinPatch :: [OS: 10.15.6 | MatchOS: All | MatchBuild: All] ==> allowed 12:079 0:000 - [04]: com.apple.driver.usb.AppleUSBXHCI (USB Port Limit Patch 4) :: BinPatch :: [OS: 10.15.6 | MatchOS: All | MatchBuild: All] ==> allowed 12:079 0:000 - [05]: com.apple.iokit.IOGraphicsFamily (Boot graphics glitch 10.13.x (IGPUs)) :: BinPatch :: [OS: 10.15.6 | MatchOS: All | MatchBuild: All] ==> allowed 12:079 0:000 Filtering KernelPatches: 12:079 0:000 - [00]: Disable panic kext logging on 10.13 debug kernel (credit vit9696) :: [OS: 10.15.6 | MatchOS: 10.13.x | MatchBuild: no] ==> not allowed by OS 12:079 0:000 - [01]: Disable panic kext logging on 10.13 release kernel (credit vit9696) :: [OS: 10.15.6 | MatchOS: 10.13.x | MatchBuild: no] ==> not allowed by OS 12:079 0:000 - [02]: Disable panic kext logging on 10.14 release kernel (credit vit9696) :: [OS: 10.15.6 | MatchOS: 10.14.x | MatchBuild: no] ==> not allowed by OS 12:079 0:000 Will not patch boot.efi 12:079 0:000 === [ PatchSmbios ] ============================= 12:079 0:000 insert table 9 for dev 0:0 12:079 0:000 insert table 9 for dev 0:1 12:079 0:000 insert table 9 for dev 0:0 12:079 0:000 insert table 9 for dev 0:0 12:079 0:000 Table 11 present, but rewritten for us 12:080 0:001 Trusting SMBIOS... 12:080 0:000 Channels: 2 12:080 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 12:080 0:000 trusted SMBIOS data: 12:080 0:000 SmbiosTable.Type17->Vendor = Kingston 12:080 0:000 SmbiosTable.Type17->SerialNumber = 73289FD1 12:080 0:000 SmbiosTable.Type17->PartNumber = 99U5471-012.A00LF 12:080 0:000 partNum=99U5471-012.A00LF 12:080 0:000 SPD data in use: 12:080 0:000 SmbiosTable.Type17->Vendor = Kingston 12:080 0:000 SmbiosTable.Type17->SerialNumber = 73289FD1 12:080 0:000 SmbiosTable.Type17->PartNumber = 99U5471-012.A00LF 12:080 0:000 SMBIOS Type 17 Index = 0 => 0 0: 12:080 0:000 BANK 0 DIMM0 1333MHz 4096MB(Ext:0MB) 12:080 0:000 trusted SMBIOS data: 12:080 0:000 SmbiosTable.Type17->Vendor = Kingston 12:080 0:000 SmbiosTable.Type17->SerialNumber = 7528CBFE 12:080 0:000 SmbiosTable.Type17->PartNumber = 99U5471-012.A00LF 12:080 0:000 partNum=99U5471-012.A00LF 12:080 0:000 SPD data in use: 12:080 0:000 SmbiosTable.Type17->Vendor = Kingston 12:080 0:000 SmbiosTable.Type17->SerialNumber = 7528CBFE 12:080 0:000 SmbiosTable.Type17->PartNumber = 99U5471-012.A00LF 12:080 0:000 SMBIOS Type 17 Index = 1 => 2 2: 12:080 0:000 BANK 1 DIMM0 1333MHz 4096MB(Ext:0MB) 12:080 0:000 trusted SMBIOS data: 12:080 0:000 SmbiosTable.Type17->Vendor = Kingston 12:080 0:000 SmbiosTable.Type17->SerialNumber = 6F28D7FE 12:080 0:000 SmbiosTable.Type17->PartNumber = 99U5471-012.A00LF 12:080 0:000 partNum=99U5471-012.A00LF 12:080 0:000 SPD data in use: 12:080 0:000 SmbiosTable.Type17->Vendor = Kingston 12:080 0:000 SmbiosTable.Type17->SerialNumber = 6F28D7FE 12:080 0:000 SmbiosTable.Type17->PartNumber = 99U5471-012.A00LF 12:080 0:000 SMBIOS Type 17 Index = 2 => 1 1: 12:080 0:000 BANK 0 DIMM1 1333MHz 4096MB(Ext:0MB) 12:080 0:000 trusted SMBIOS data: 12:080 0:000 SmbiosTable.Type17->Vendor = Kingston 12:080 0:000 SmbiosTable.Type17->SerialNumber = 7528AAEA 12:080 0:000 SmbiosTable.Type17->PartNumber = 99U5471-012.A00LF 12:080 0:000 partNum=99U5471-012.A00LF 12:080 0:000 SPD data in use: 12:080 0:000 SmbiosTable.Type17->Vendor = Kingston 12:080 0:000 SmbiosTable.Type17->SerialNumber = 7528AAEA 12:080 0:000 SmbiosTable.Type17->PartNumber = 99U5471-012.A00LF 12:080 0:000 SMBIOS Type 17 Index = 3 => 3 3: 12:080 0:000 BANK 1 DIMM1 1333MHz 4096MB(Ext:0MB) 12:080 0:000 mTotalSystemMemory = 16384 12:080 0:000 NumberOfMemoryDevices = 4 12:080 0:000 Type20[0]->End = 0x3FFFFF, Type17[0] = 1000 12:080 0:000 Type20[1]->End = 0xBFFFFF, Type17[2] = 4000 12:080 0:000 Type20[2]->End = 0x7FFFFF, Type17[1] = 6000 12:080 0:000 Type20[3]->End = 0xFFFFFF, Type17[3] = A000 12:080 0:000 Table 131 is present, CPUType=31 12:080 0:000 Change to: 604 12:080 0:000 === [ PatchACPI ] =============================== 12:080 0:000 Xsdt reallocation done 12:080 0:000 old FADT length=10C 12:080 0:000 SignatureFixup: 0x0 -> 0x0 12:080 0:000 Apply DsdtFixMask=0x00008004 12:080 0:000 === [ FixBiosDsdt ] ============================= 12:081 0:000 Patching DSDT: 12:081 0:000 - [change GFX0 to IGPU]: disabled 12:081 0:000 - [change LPC to LPCB]: pattern 4C50435F, bin not found / already patched! 12:081 0:000 - [change SAT0 to SATA]: pattern 53415430, patched at: [ (4C9B) ] 12:081 0:000 - [Change PEGP to GFX0]: pattern 50454750, patched at: [ (38F5) ] 12:081 0:000 - [change EHC1 to EH01]: pattern 45484331, patched at: [ (3D65) ] 12:081 0:000 - [change EHC2 to EH02]: pattern 45484332, patched at: [ (42A1) ] 12:081 0:000 - [change EC0 to EC]: pattern 4543305F, bin not found / already patched! 12:081 0:000 0 replacements 12:081 0:000 NewName HDEF already present, renaming impossible 12:082 0:000 PreCleanup XSDT: count=10, length=116 12:082 0:000 PreCleanup XSDT, corrected XSDT: count=10, length=116 12:082 0:000 === [ ACPIDropTables ] ========================== 12:082 0:000 Drop tables from XSDT, SIGN=SSDT TableID=CpuPm Length=2706 12:082 0:000 Table[7]: SSDT CpuPm 2706 dropped 12:082 0:000 Drop tables from XSDT, SIGN=SSDT TableID=Cpu0Ist Length=2474 12:082 0:000 Table[6]: SSDT Cpu0Ist 2474 dropped 12:082 0:000 Patching SSDT SataTabl Length=877 12:082 0:000 0. [change GFX0 to IGPU]: disabled 12:082 0:000 1. [change LPC to LPCB]: pattern 4C50435F, bin not found / already patched! 12:082 0:000 2. [change SAT0 to SATA]: pattern 53415430, patched at: [ (B5) ] 12:082 0:000 3. [Change PEGP to GFX0]: pattern 50454750, bin not found / already patched! 12:082 0:000 4. [change EHC1 to EH01]: pattern 45484331, bin not found / already patched! 12:082 0:000 5. [change EHC2 to EH02]: pattern 45484332, bin not found / already patched! 12:082 0:000 6. [change EC0 to EC]: pattern 4543305F, bin not found / already patched! 12:082 0:000 0 replacements 12:082 0:000 ApicCPUNum=4 12:082 0:000 Maximum control=0x22 12:082 0:000 Turbo control=0x26 12:082 0:000 P-States: min 0x7, max 0x26 12:082 0:000 SSDT with CPU P-States generated successfully 12:082 0:000 SSDT with CPU C-States generated successfully 12:082 0:000 Cleanup XSDT: count=12, length=132 12:082 0:000 corrected XSDT count=10, length=116 12:082 0:000 === [ RestSetup macOS ] ========================= 12:082 0:000 EdidDiscovered size=128 12:082 0:000 --- Discovered EDID Table size:128 12:082 0:000 000 | 00 FF FF FF FF FF FF 00 10 AC 12:082 0:000 010 | 7D A0 55 30 4D 31 2E 15 01 03 12:082 0:000 020 | 80 35 1E 78 EA 92 65 A6 55 55 12:082 0:000 030 | 9F 28 0D 50 54 A5 4B 00 71 4F 12:082 0:000 040 | 81 80 D1 C0 01 01 01 01 01 01 12:082 0:000 050 | 01 01 01 01 02 3A 80 18 71 38 12:082 0:000 060 | 2D 40 58 2C 45 00 13 2B 21 00 12:082 0:000 070 | 00 1E 00 00 00 FF 00 54 54 4D 12:082 0:000 080 | 44 47 31 42 39 31 4D 30 55 0A 12:082 0:000 090 | 00 00 00 FC 00 44 45 4C 4C 20 12:082 0:000 100 | 50 32 34 31 32 48 0A 20 00 00 12:082 0:000 110 | 00 FD 00 38 4C 1E 53 11 00 0A 12:082 0:000 120 | 20 20 20 20 20 20 00 A6 12:082 0:000 Framebuffer @0xe0000000 MMIO @0xf7e20000 I/O Port @0x e000 ROM Addr @0xF7E00000 12:082 0:000 PCI region 1 = 0x 0, region3 = 0x 0, region5 = 0x 0 12:082 0:000 BIOS_0_SCRATCH=0x00000004, 1=0x000000FF, 2=0x00000000, 3=0x00000000, 4=0x00000000, 5=0x00000000, 6=0x00000000 12:082 0:000 RADEON_CRTC2_GEN_CNTL == 0x00000000 12:082 0:000 card posted because CONFIG_MEMSIZE=0x400 12:082 0:000 ATI card POSTed, 12:082 0:000 Set VRAM for Cedar =1024Mb 12:082 0:000 ATI: get_vram_size returned 0x40000000 12:082 0:000 Framebuffer set to device's default: Eulemur 12:082 0:000 N ports defaults to 3 12:082 0:000 (AtiPorts) Nr of ports set to: 3 12:082 0:000 ATI: No default properties injected 12:082 0:000 ATI Cedar ATI Radeon HD 7300 Series 1024MB (Eulemur) [1002:68FA] (subsys [174B:E127]):: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0) 12:082 0:000 setting specified layout-id=1 (0x1) 12:082 0:000 stringlength = 2708 12:082 0:000 CurrentMode: Width=1024 Height=768 12:082 0:000 Beginning FSInjection FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: CFB0FD98 FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: CFB0FD98 12:089 0:006 Use origin smbios table type 1 guid. 12:098 0:008 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other 12:098 0:000 ->Extra kext: EFI\CLOVER\kexts\Other\VirtualSMC.kext (v.1.1.4) 12:108 0:010 ->Extra kext: EFI\CLOVER\kexts\Other\USBInjectAll.kext (v.0.7.5) 12:335 0:226 ->Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext (v.2.2.2) 12:347 0:012 ->Extra kext: EFI\CLOVER\kexts\Other\WhateverGreen.kext (v.1.4.0) 12:362 0:015 ->Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.5.0) 13:099 0:737 ->Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.4.5) 13:112 0:012 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Off 13:112 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10 13:112 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10_normal 13:112 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15 13:112 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15_normal 13:112 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15.6 13:112 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15.6_normal 13:114 0:001 SetStartupDiskVolume: 13:114 0:000 * Volume: 'Kingston120GB' 13:114 0:000 * LoaderPath: '' 13:114 0:000 * DevPath: Kingston120GB 13:114 0:000 * GUID = E76F52EC-F8B2-45CC-BB62-6A531F658340 13:114 0:000 * efi-boot-device: IOMatchIOProviderClassIOMediaIOPropertyMatchUUIDE76F52EC-F8B2-45CC-BB62-6A531F658340 13:114 0:000 Custom boot screen not used because entry has unset use graphics